Sr. Industrial Mechanic
Washington , Pennsylvania
Experience: 0
Category: Industrial & Manufacturing
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 83200.00
Job ID: 345260
Date Posted: 01/21/2026
Shortcut: http://jobs.systemone.com/6xwftF
Job Title: Sr. Industrial Mechanic
Location: Washington , PA
Type: Direct Hire
Compensation: $83200 annually
Contractor Work Model: Onsite
Objective
Diagnose, repair, and restore electromechanical systems including electric motors, pumps, and related assemblies to operational standards while maintaining documentation and safety compliance.
Responsibilities
- Review work orders to identify job status, authorization limits, cost estimates, and reported malfunctions
- Conduct diagnostic testing on electromechanical systems using AC or DC testing methods to identify failures
- Disassemble equipment while documenting component identification, assembly configuration, and part condition
- Clean assemblies using parts washers, steam cleaners, caustic baths, glass beaders, and similar methods
- Measure and order appropriate replacement components through approved requisition processes
- Replace or rebuild defective parts including bearings, brushes, brush holders, motor leads, gears, seals, impellers, mechanical switches, brakes, clutches, clutch rotors, tachs, fans, and end shields
- Perform post-repair testing to verify proper output and operational performance
- Complete job documentation accurately and within required timeframes
- Operate specialized diagnostic and repair equipment as needed
- Maintain organized and clean workspace
- Follow safety protocols and utilize required protective equipment (eye protection, hearing protection)
- Assist other mechanics and service personnel with tasks as assigned
Requirements
- High school diploma or equivalent required
- Completion of hands-on apprenticeship program preferred
- Basic mechanical aptitude
- Ability to learn and apply skill-based training and operational procedures
- Frequently lift and move up to 50 pounds
- Regularly lift and move up to 25 pounds; stand and walk for extended periods
- Occasionally lift and move objects exceeding 100 pounds
- Climb, balance, stoop, kneel, crouch, and crawl as needed
- Use hands for handling, gripping, and reaching tasks
- Clear vision at 20+ feet (with or without corrective lenses)
- Close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus
Preferences
- Prior experience with electromechanical repair
- Familiarity with AC and DC testing equipment
- Background in motor rebuild or electromechanical troubleshooting
System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.
System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.
#M-1
Ref: #282-Eng Pgh
-
Industrial Mechanic
Washington , Pennsylvania
Job Title: Industrial Mechanic Location: Washington , PA Type: Direct Hire Compensation: $56160 annually Contractor Work Model: Onsite Industrial Mechanic Objective Restore and rebuild electromechanical machinery including motor assemblies, pumping equ...
Date Posted: 01/21/2026 Recommended
-
Servo Motor Specialist
Washington , Pennsylvania
Job Title: Servo Motor Specialist Location: Washington , PA Type: Direct Hire Compensation: Open Contractor Work Model: Onsite Servo Motor Specialist Objective Establish and maintain optimal performance of servo-driven motion control systems across ind...
Date Posted: 01/21/2026 Recommended
-
Test Technician
Baltimore, Maryland
Job Title: Test Technician Location: Baltimore, Maryland Type: Contract To Hire Compensation: $24 - $24 hourly Contractor Work Model: Onsite Main Accountabilities Core purpose: This is a classification performing skilled, repair and modification on all...
Date Posted: 02/13/2026 Recommended
-
Maintenance Technician
Latrobe, Pennsylvania
Job Title: Maintenance Technician Location: Latrobe, PA Type: Direct-Hire Compensation: 55K-65K Contractor Work Model: Onsite Hours: 8AM-5PM, Mon-Fri Maintenance Technician Objective Our facility seeks a 1st Shift/Daylight maintenance professional to s...
Date Posted: 03/13/2026 Recommended
-
Maintenance Electrician Specialist
Bridgeton , NJ
Job Title: Maintenance Electrician Location: Bridgeton , NJ Type: Contract To Hire Compensation: $29 - $35 hourly Contractor Work Model: Onsite Hours: 8a-4:30p Job Description Perform preventive maintenance, repairs, and upgrades on facility wiring, co...
Date Posted: 04/01/2026 Recommended
-
Railcar Electromechanical Production Technician
Santa Fe Springs, CA
Job Title: Railcar Electromechanical Production Technician Location: Santa Fe Springs, CA Type: Contract To Hire Compensation: $22.00 - $32.00 per hour Contractor Work Model: Onsite Overview Responsibilities Assemble and install electrical and mechanic...
Date Posted: 03/13/2026 Recommended
-
Facility Maintenance Mechanic
Cranbury, NJ
Job Title: Facility Maintenance Mechanic Location: Cranbury, NJ Hours / Schedule: Monday–Friday (8:00 AM – 5:00 PM), some flexibility for early / late shifts and occasional weekends as needed Type: Contract To Hire Compensation: $34.50 per hour pending...
Date Posted: 04/15/2026 Recommended
-
Controls Engineer
West Branch, IA
Job Title: Controls Engineer Location: West Branch, IA Type: Contract Compensation: $34.62 Contractor Work Model: Onsite Schedule (2 positions available) 2 pm to 10:30 pm 10 pm to 6:30 am. Controls Engineer Responsibilities: Provide 1st, 2nd, and 3rd l...
Date Posted: 03/10/2026 Recommended
-
Electrical Assembler
Cranberry Township, Pennsylvania
Job Title: Electrical Assembler Location: Cranberry Township, Pennsylvania Type: Contract To Hire Compensation: $22-24/hr Contractor Work Model: Onsite Objective Perform electrical assembly and panel wiring operations for industrial control systems. Ex...
Date Posted: 02/10/2026 Recommended
-
Foods Maintenance Tech, 1st Shift
Tulsa, OK
System One is partnering with a company seeking a Maintenance Technician in the Tulsa, OK area. Responsibilities include: Provide industrial maintenance support to ensure the safe and effective troubleshooting and repair of systems including PLCs, moto...
Date Posted: 04/09/2026 Recommended
-
Diesel Mechanic
Manassas, Virginia
Job Title: Diesel Mechanic Location: Manassas, Virginia Type: Direct Hire Compensation: $28.46 - $42.95 hourly Contractor Work Model: Onsite 1st Shift 6am – 2:30pm 2nd Shift 2pm – 10:30pm Diesel Mechanic – Heavy-Duty Diesel Vehicle Maintenance and Repa...
Date Posted: 02/04/2026 Recommended
-
Diesel Mechanic
Woodbridge, Virginia
Job Title: Diesel Mechanic Location: Woodbridge, Virginia Type: Direct Hire Compensation: $28.46 - $42.95 hourly Contractor Work Model: Onsite 1 st Shift 6am – 2:30pm 2 nd Shift 2pm – 10:30pm Diesel Mechanic – Heavy-Duty Diesel Vehicle Maintenance and ...
Date Posted: 02/04/2026 Recommended
-
Avionics Tech
Owasso, OK
System One is working with a client to find an Avionics Tech (Day Shift) Responsibilities Troubleshoot, diagnose, repair, and test avionics and electronic components. Perform functional testing using approved test equipment and procedures. Interpret CM...
Date Posted: 04/17/2026 Recommended
-
Engineering Electronics Technician - 100% Travel
Dallas, Texas
Engineering Electronics Technician 100% Travel System One is seeking traveling Engineering Electronics Technicians to support telecommunications and FAA site infrastructure projects throughout Texas and surrounding states. Primary responsibilities incl...
Date Posted: 04/07/2026 Recommended
-
Electrical, Instrumentation & Controls Engineer
New Castle, Delaware
Job Title: Electrical, Instrumentation & Controls Engineer Location: New Castle, Delaware Type: Direct Hire Compensation: $95000 - $125000 annually Contractor Work Model: Onsite Job Summary: The Electrical, Instrumentation & Controls Engineer is respon...
Date Posted: 02/09/2026 Recommended
-
Maintenance Mechanic
Geneva, NY
Job Title: Maintenance Mechanic Location: Geneva, NY Compensation: Up to $41.50 per hour Contractor Work Model: Onsite – onsite Hours: 12-hour rotating Continental (2-2-3 / Panama Schedule) shift hours: 6:00 AM – 6:00 PM / 6:00 PM – 6:00 AM (rotating) ...
Date Posted: 03/30/2026 Recommended
-
BFD Automation Technician 1st Shift
Tulsa, OK
Description: The Automation Technician provides industrial maintenance support to ensure the safe and effective operation of the production facility. Serves as the technical expert in the maintenance work activities related to automation of facility eq...
Date Posted: 04/15/2026 Recommended
-
Rail Services Technician
Landover Hills, NY
Job Title: Rail Services Technician Location: Landover Hills, NY Type: Direct Hire Compensation: $24 - $36 hourly Contractor Work Model: Onsite OVERVIEW: The successful candidate will have previous knowledge within a maintenance and engineering environ...
Date Posted: 04/14/2026 Recommended
-
Industrial Electrical Designer (Hybrid)
Foley, AL
Industrial Electrical Designer (Hybrid) Foley, AL 36535 System One is seeking an Industrial Electrical Designer in Foley, Alabama to support heavy-industrial and manufacturing projects. This position works closely with Electrical, Mechanical, Structura...
Date Posted: 04/09/2026 Recommended
-
Manufacturing Associate
Novato, CA
Job Title: Manufacturing Associate Location: Novato, CA 94949 Type: Contract Compensation: $28.00 per hour with shift differential Contractor Work Model: Onsite Hours: Sunday – Tuesday 6:00 p.m. - 7:00 a.m., with alternating Saturdays Overview Leading ...
Date Posted: 04/13/2026 Recommended
-
Wastewater Treatment Plant Field Operator
Rochester, NY
Wastewater Treatment Plant Field Operator Location: Rochester, NY (Kings Landing Wastewater Treatment Plant) Onsite Schedule: Rotating shift schedule (12-hour shifts) Pay: Flexible based on experience (typically $21–$25/hr for entry-level); overtime op...
Date Posted: 04/07/2026 Recommended
-
Industrial Electrical Designer
Foley, AL
Industrial Electrical Designer Location: Foley, AL Job Type: Contract-to-Hire Work Model: Onsite Hours: 40 hours/week Overview System One is seeking a skilled Industrial Electrical Designer to support heavy industrial and manufacturing projects. This r...
Date Posted: 04/15/2026 Recommended
-
I&C Technician
Rochester, NY
I&C Technician (Instrumentation & Controls) Location: Rochester, NY Work Model: Onsite Schedule: Day shift | 8-hour shifts | 40 hours/week (overtime available) Pay Range: $26–$37/hour Position Summary The I&C Technician installs, maintains, troubleshoo...
Date Posted: 04/07/2026 Recommended
-
Fuel Fabrication Chemical Analysis Technician
Everett, WA
Job Title: Fuel Fabrication Chemical Analysis Technician Location: Everett, WA Type: Contract Contractor Work Model: Onsite Responsibilities Perform a wide range of laboratory-based research, chemical analysis, and development activities to support fue...
Date Posted: 04/06/2026 Recommended
-
Director of Engineering Operations
Morgantown, West Virginia
Job Title: Director of Engineering Operations Location: Morgantown, WV Type: Direct Hire Compensation: Contractor Work Model: Onsite Director of Engineering Operations *Relocation Assistance Available Objective Lead engineering operations for a food ma...
Date Posted: 01/28/2026 Recommended
-
Maintenance Mechanic
Geneva, NY
Job Title: Maintenance Mechanic Location: Geneva, NY Work Schedule: 3rd shift Compensation: $35.00 - $40.00/hr Type: Direct Hire Requirements Repair, maintain, and support equipment on both Aerosol and Hair Care Packaging lines to maximize productivity...
Date Posted: 02/20/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $42.32; E/I & C Note: all new hires begin at Level I. Advancement to Level II & III is dependent o...
Date Posted: 04/16/2026 Recommended
-
Maintenance Technician
Kansas City, Missouri
Job Title: Maintenance Technician Location: Kansas City, MO Hours/Schedule: 2nd Shift TBD Compensation: $29/hour Performs maintenance and repairs on production and facility equipment to reduce downtime and support operational efficiency. This role trou...
Date Posted: 04/07/2026 Recommended
-
Mechanical Test Technician
Bellevue, Washington
Mechanical Test Technician System One is seeking a Mechanical Test Technician to support advanced engineering and testing activities within the nuclear energy sector. This role is ideal for hands-on, detail-oriented technicians who enjoy working closel...
Date Posted: 04/16/2026 Recommended
-
Component Engineer, Nuclear
Bellevue, WA
Job Title: Component Engineer, Nuclear Type: Contract Compensation: $52 - $85 hourly Contractor Work Model: Remote Position Overview: We are seeking an experienced and detail-oriented Component Engineer to support component design efforts in the nuclea...
Date Posted: 02/23/2026 Recommended