Senior Manufacturing Engineer
Batesburg-Leesville, South Carolina
Experience: 0
Category: Industrial & Manufacturing
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 115000.00 - 130000.00
Job ID: 351755
Date Posted: 06/03/2026
Shortcut: http://jobs.systemone.com/AfhIAO
Job Title: Senior Manufacturing Engineer
Location: Batesburg-Leesville, South Carolina
Type: Direct Hire
Compensation: $115,000.00 - $130,000.00
Contractor Work Model: Onsite – onsite
Overview
The Senior Manufacturing Engineer, Industrial Engineering & Maintenance will be responsible for optimizing manufacturing processes, improving efficiency, and ensuring the reliable operation of production equipment within Hitachi Rail. This role focuses on applying industrial engineering principles to enhance productivity and supporting the maintenance of advanced rail signaling and transportation systems.
Responsibilities
- Analyze existing manufacturing processes, identify bottlenecks, and implement solutions to improve production efficiency, reduce waste, and enhance product quality using lean manufacturing and Six Sigma methodologies.
- Design and optimize factory layouts, workstation configurations, and material flow to maximize output and minimize operational costs.
- Conduct time and motion studies to establish standard work procedures, improve ergonomics, and develop accurate production rate estimates.
- Collaborate with maintenance teams to develop and implement preventative and predictive maintenance programs, analyze equipment failures, and recommend improvements to increase uptime and reduce maintenance costs.
- Design, develop, and implement specialized tooling, jigs, and fixtures to improve manufacturing accuracy, efficiency, and safety.
- Collect, analyze, and interpret manufacturing data to identify trends, measure performance against key metrics, and generate reports for continuous improvement initiatives.
- Lead and participate in continuous improvement projects, kaizen events, and root cause analysis to drive operational excellence.
- Ensure all manufacturing processes and maintenance activities adhere to company safety standards, environmental regulations, and relevant industry compliance.
- Work closely with design engineering, production, quality assurance, and supply chain teams to ensure seamless product introduction and ongoing operational efficiency.
- Develop and deliver training to production staff on new processes, equipment, and safety procedures. Create and maintain comprehensive process documentation.
Requirements
- Minimum of 7 years of experience in a manufacturing engineering role, preferably within a complex industrial or rail-related manufacturing environment.
- Experience with industrial engineering principles is essential.
- Proficiency in Lean Manufacturing, Six Sigma, and other continuous improvement methodologies (Green Belt or Black Belt certification highly desirable).
- Strong understanding of manufacturing processes, production planning, and quality control.
- Experience with CAD Software (e.g., AutoCAD, SolidWorks) for factory layout and fixture design.
- Familiarity with OEE (Overall Equipment Effectiveness) and CMMS (Computerized Maintenance Management System) Software.
- Proficiency in data analysis tools (e.g., Excel, Minitab, statistical software).
- Proven problem-solving skills for analyzing and resolving complex manufacturing and operational issues.
- Excellent verbal and written communication skills for presenting technical information effectively.
- Ability to work effectively in a cross-functional team environment and lead improvement initiatives.
- Self-motivated with a drive for continuous improvement and operational excellence.
- Physical ability to work in a manufacturing environment, including standing for extended periods, lifting up to 25 lbs, and working near machinery.
- Bachelor's Degree in Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Mechanical Engineering.
- English proficiency.
System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.
System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.
#M1
#LI-JB1
Ref: #260-Eng NY Transit
-
Lead Manufacturing Test Engineer
Batesburg-Leesville, South Carolina
Job Title: Lead Manufacturing Test Engineer Location: Batesburg-Leesville, North Carolina Type: Direct Hire Compensation: $100,000.00 - $125,000.00 Contractor Work Model: Onsite – onsite Responsibilities Lead a team of approximately 8 Test Engineers in...
Date Posted: 05/21/2026 Recommended
-
Test Technician
Batesburg-Leesville, SC
Job Title: Test Technician Location: Batesburg-Leesville, South Carolina Type: Contract Compensation: $26-28 per hour Contractor Work Model: Onsite – onsite Essential Duties and Responsibilities •Understand and interpret technical drawings, blueprints,...
Date Posted: 07/31/2026 Recommended
-
Head of Engineering Operations
Morgantown, West Virginia
Job Title: Head of Engineering Operations Location: Morgantown, WV Type: Direct Hire Compensation: Work Model: Onsite – onsite Hours: 40.0 Responsibilities Oversee the planning, development, and implementation of processes, systems, and resource alloca...
Date Posted: 07/02/2026 Recommended
-
Plant Engineer
Morgantown, WV
Here's a recruiter-friendly version with company identifiers removed and streamlined for posting or candidate outreach: Plant Engineer Location: Morgantown, WV Type: Direct Hire Salary: $95,000 - $115,000 Work Model: Onsite Position Overview We are see...
Date Posted: 07/06/2026 Recommended
-
Head Of Operations
Santa Fe Springs, CA
Job Title: Head of Operations Location: Santa Fe Springs, CA Type: Direct Hire Compensation: $150,000 - $190,000 annually Work Model: Onsite Our Client headquartered in Santa Fe Springs, CA, is a fast-growing manufacturer specializing in electric equip...
Date Posted: 06/10/2026 Recommended
-
Manufacturing Engineer
Lebanon, Ohio
Job Title: Manufacturing Engineer Location: N. Cincinnati, Ohio Type: Direct Hire Work Model: Onsite Responsibilities • Support manufacturing processes by evaluating and improving capabilities, scheduling, specifications, and quality standards • Collab...
Date Posted: 06/23/2026 Recommended
-
Maintenance Integration Engineer
Bellevue, WA
Job Title: Maintenance Integration Engineer Location: Bellevue, WA Type: Contract Compensation: $52.00 - $85.00 Work Model: Remote – offsite Hours: 40.0 System One is seeking an experienced Maintenance Integration Engineer to support the integrated des...
Date Posted: 08/04/2026 Recommended
-
Sr. Controls Engineer
Morgantown, West Virginia
Job Title: Sr. Controls Engineer Location: Morgantown, WV Type: Direct Hire Compensation: Work Model: Onsite – onsite Hours: 40.0 Security Clearance: Responsibilities Develop the control architecture to ensure the facility is collecting the data and in...
Date Posted: 07/02/2026 Recommended
-
Electrical Controls Engineer
Kansas City, MO
Electrical Controls Engineer Full-Time | Kansas City, MO Travel: Up to 50% (including occasional extended trips) Position Overview Seeking an experienced Electrical Controls Engineer to support turnkey control system projects. This role involves collab...
Date Posted: 07/28/2026 Recommended
-
Mechanical Design Engineer
Tulsa, OK
Job Title: Mechanical Design Engineer Location: Tulsa, OK Type: Direct Hire Compensation: $100,000.00 - $125,000.00 Contractor Work Model: Onsite – onsite Hours: 40.0 Security Clearance: Mechanical Design Engineer We are seeking a Mechanical Design Eng...
Date Posted: 08/05/2026 Recommended
-
Sr. Process Engineer
Morgantown, West Virginia
Job Title: Sr. Process Engineer Location: Morgantown, WV Type: Direct Hire Compensation: Work Model: Onsite – onsite Responsibilities Lead, design, install, commission, maintain, and improve low-acid aseptic process and equipment. Implement and maintai...
Date Posted: 07/02/2026 Recommended
-
Manufacturing Operations Manager
Ford City , Pennsylvania
Job Title: Manufacturing Operations Manager Location: Ford City, PA Type: Direct Hire Work Model: Onsite – onsite Hours: 40.0 Overview: Leads daily manufacturing operations, personnel, and cross-functional initiatives to meet safety, quality, delivery,...
Date Posted: 07/31/2026 Recommended
-
Production Operations Planner / Scheduler
Neptune, NJ
Job Title: Production Operations Planner / Scheduler Location: Neptune, NJ Type: Direct Hire Compensation: $65K - $70K penidng overall experience Work Model: Onsite Hours: Mon-Fri; 8:30am-5pm Responsibilities Develop, coordinate, and maintain productio...
Date Posted: 07/30/2026 Recommended
-
Design Engineer II
Broken Arrow, Oklahoma
System One is working with a local client to find a Design Engineer II Design Engineer II Responsibilities Analyze products and tooling to develop and maintain design standards and specifications that meet customer requirements. Ensure product compatib...
Date Posted: 07/13/2026 Recommended
-
Electrical Tech
Meadville, Pennsylvania
Job Title: Electrical Tech Location: Meadville, Pennsylvania Type: 6 Month Contract Compensation: $25-$35 per hour Hours: Monday - Friday starting at 6 AM (8-10 hour days) Overview We are seeking an Electrical Technician to support a busy manufacturing...
Date Posted: 07/09/2026 Recommended
-
Senior Reliability Engineer
Paulsboro, NJ
Job Title: Senior Reliability Engineer Location: Paulsboro, NJ Type: Direct Hire Compensation: $115,000.00 - $125,000.00/year Overview Our client a global leader in complex API development and manufacturing is looking to add a Reliability Engineer to t...
Date Posted: 06/09/2026 Recommended
-
Maintenance Technician
Eatontown, NJ
Job Title: Maintenance Technician Location: Eatontown, NJ Type: Full-time, direct hire Compensation: $65,000.00 to $68,000.00 Work Model: Onsite Hours: 2nd Shift: Monday – Friday, 2:00 PM – 10:30 PM Maintenance Technician Responsibilities: Perform rout...
Date Posted: 07/31/2026 Recommended
-
Senior Mechanical Engineer
Salt lake city, Utah
Job Title: Senior Mechanical Engineer Location: Salt Lake City, Utah Type: Contract To Hire Compensation: $67.30 - $79.32 per hour Work Model: Hybrid – onsite and remote Hours: 40.0 Responsibilities Lead the mechanical design and technical execution of...
Date Posted: 07/08/2026 Recommended
-
Engineer - Manufacturing III
Huntsville, AL
Manufacturing Engineer III Location: Huntsville, Alabama A-Shift (5:00AM to 3:30PM) Monday to Friday Compensation: starting at $72 per hour Contract / On-site Position Overview As a Manufacturing Engineer, you will translate engineering intent, drawing...
Date Posted: 07/28/2026 Recommended
-
Manufacturing Engineer / Circuit Card
Archbald, PA
Manufacturing Engineer – Circuit Card Assembly First Shift 12 Month Contract position Are you passionate about electronics manufacturing and ready to make a real impact on the shop floor? Join our team as a Manufacturing Engineer supporting Circuit Car...
Date Posted: 05/08/2026 Recommended
-
Sr. Process Engineer
Huntingdon, PA
Job Title: Sr. Process Engineer Location: Huntingdon, PA Type: Direct Hire Compensation: $110,000.00 - $140,000.00 Work Model: Onsite – onsite Hours: 40.0 Overview Drive process improvement and operational excellence in fiberglass and composite manufac...
Date Posted: 06/22/2026 Recommended
-
Avionics Inspector - Quality
Owasso, OK
System One is working with a client to find an Avionics Inspector- Quality. 1st Shift Responsibilities Perform incoming, in-process, and final inspections on avionics components and instruments to ensure compliance with approved data, technical manuals...
Date Posted: 07/16/2026 Recommended
-
Lead Mechanic
Dayton , NJ
Job Title: Lead Mechanic Location: Dayton, NJ Type: Direct Hire Compensation: Up to $40 per hour Contractor Work Model: Onsite – onsite Hours: 7 AM- 3:30 PM Overview Responsibilities Oversee and support the maintenance, troubleshooting, and optimizatio...
Date Posted: 05/15/2026 Recommended
-
General Manager-Commercial HVAC
Pasadena, California
Job Title: General Manager-Commercial HVAC Location: Pasadena, CA Type: Direct Hire Compensation: $100,000 - $135,000 annually Work Model: Onsite – onsite Overview The Services Business Unit Manager will provide leadership and direction for day-to-day ...
Date Posted: 07/16/2026 Recommended
-
Commissioning Engineer
Kemmerer, Wyoming
Job Title: Commissioning Engineer Location: Kemmerer, Wyoming Type: Contract Compensation: $69.00 - $115.00 Work Model: Onsite – onsite Overview System One is seeking multiple Commissioning Engineers to support our client for a 12 month contract. Initi...
Date Posted: 07/21/2026 Recommended
-
Mechanical Engineer / Designer
Foley, AL
Mechanical Engineer / Designer Foley, AL 36535 System One is seeking a Mechanical Engineer / Designer in Foley, Alabama to support industrial projects from concept through installation by developing mechanical/structural design packages and producing f...
Date Posted: 06/03/2026 Recommended
-
Avionics Tech
Owasso, OK
System One is working with a client to find an Avionics Tech Level 1 (Day Shift) Responsibilities Troubleshoot, diagnose, repair, and test avionics and electronic components. Perform functional testing using approved test equipment and procedures. Inte...
Date Posted: 07/17/2026 Recommended
-
Avionics Tech
Owasso, OK
System One is working with a client to find an Avionics Tech Level 1 (Day Shift) Responsibilities Troubleshoot, diagnose, repair, and test avionics and electronic components. Perform functional testing using approved test equipment and procedures. Inte...
Date Posted: 07/16/2026 Recommended
-
Nuclear Engineering Program Specialist and Procedure Writer Engineer
Bellevue, Washington
Nuclear Engineering Plant Program Specialist / Nuclear Procedure Writer Job Type: Contract - Remote Schedule: 40 hours/week System One is seeking an experienced Nuclear Engineering Plant Program Specialist / Nuclear Procedure Writer to support the deve...
Date Posted: 07/29/2026 Recommended
-
Electrical Assembler
Batesburg-Leesville, South Carolina
Job Title: Electrical Assembler Location: Batesburg-Leesville, South Carolina Type: Contract Compensation: $22 - $26 hourly Contractor Work Model: Onsite Electrical Assembler: Duties Include: • Ability to read and follow wire harness assembly instructi...
Date Posted: 07/31/2026 Recommended