Wind Turbine Technician - O&M
Houston, Texas
Experience: 2
Category: Other
Contractor Work Model: Onsite
Brand: System One
Job ID: 346190
Date Posted: 04/29/2026
Shortcut: http://jobs.systemone.com/LvwbvC
JOB TITLE:
Wind Turbine Technician
LOCATION:
Various locations across the USA, 100% Travel.
JOB TYPE:
Contract, Project to Project.
COMPENSATION:
- Pay based on experience.
- $140 Per Diem.
- PPE and free training.
- Truck (after MVR and if need it) with maintenance and gas covered.
- Health, Dental and Visual insurance.
- W-2 Employee.
- Weekly pay.
This position requires you to apply your electro-mechanical skills and experience in determining, performing, and inspecting of maintenance and repair requirements for assigned Wind Turbines.
ESSENTIAL DUTIES & RESPONSIBILITIES:
- Perform diagnosis and repair to Wind Turbines as directed by the Site Supervisor and prepare and maintain proper documentation to support the repairs, including parts usage and time worked.
- Perform quality control inspections on repairs and maintenance functions provided by maintenance or repair sub-contractors.
- Prepare timely and concise reports regarding inspections to ensure proper steps are taken to remedy any deficiencies.
- Interact closely with onsite maintenance sub-contractors’ employees and provide guidance and training when applicable.
- Be proactive regarding wind turbine countermeasures or enhancements that may be needed and assist in the development of such procedures as required.
- Assure proper procedures are followed by the sub-contractor during troubleshooting, repairs, or countermeasure installations.
- Assure proper procedures are followed by the sub-contractor to perform regularly scheduled maintenance activities.
- Strive to keep maintenance costs low and quality high.
- Comply with all Safety policies and procedures and report any violation to the Site Supervisor immediately.
- Assist the Site Supervisor in effectively maintaining parts inventory to include initiation or continuance of inventory stock and issuance system for spare parts and defective parts control and communication.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION AND/OR EXPERIENCE:
The minimum education requirement is high school completion and at least (1-2) years of related experience and/or training; or an equivalent combination of education and experience.
PHYSICAL DEMANDS & WORK ENVIRONMENT:
Regularly required to stand, walk, and climb a ladder to extreme heights. Frequently lift and/or move up to 25 pounds. Occasionally lift and/or move up to 50 pounds. The noise level in the work environment is usually moderate to loud. Hearing protection may be recommended and/or required in some areas.
Ref: #160-Wind Texas
-
Wind Turbine GE LOTO Technician
Houston, Texas
Job Title Wind Turbine GE (LOTO) Technician Pay Rate Based on experience, Per Diem, Truck and PPE provided Location: Various locations across the USA (100% Travel) Summary System One is currently hiring GE LOTO certified wind technicians. This position...
Date Posted: 05/22/2026 Recommended
-
Wind Turbine Blade Repair Technician
Houston, Texas
Job Title Wind Turbine Blade Repair Technician Pay Hourly DOE +$140/Day Per Diem Work Location Various locations across the USA – 100% Travel Summary The Blade Repair Technician is responsible for wind turbine blades inspections, services or repairs. T...
Date Posted: 04/29/2026 Recommended
-
Maintenance Technician (Pump Mechanic)
Quincy, MA
Title: Maintenance Technician/Pump Mechanic Location: Quincy, MA area Start Date: ASAP! Duration: Direct Hire Salary: $27-$40/hr based on experience Hours: Mon-Fri; 6am-2:30pm Degree/Experience: - High school graduate/GED (Post-secondary certificate in...
Date Posted: 06/03/2026 Recommended
-
Multi-Craft Maintenance Mechanic Journeyman
Spring Grove, Pennsylvania
Job Title: Multi-Craft Maintenance Mechanic Journeyman Location: Spring Grove, Pennsylvania Type: Direct Hire Compensation: Level I: $36.10. Note, all new hires start as a Level I. Advancement to Level II and Level III is dependent on work performance....
Date Posted: 05/14/2026 Recommended
-
Rolling Stock Maintenance Technician
Pearl City, Hawaii
Job Title: Rolling Stock Maintenance Technician Location: Pearl City, Hawaii Type: Direct Hire Compensation: $28.65/hour Contractor Work Model: Onsite Hours: 40.0 hours per week Responsibilities Perform corrective, preventive, and unscheduled maintenan...
Date Posted: 04/23/2026 Recommended
-
Electrical Test Technician
Elmira Heights, NY
OVERVIEW: The successful candidate will have previous knowledge of the theory of electricity, electrical schematics and various electrical measuring devices such as multi-meters, oscilloscopes, and megger/hi-pot testing FUNCTIONAL DESCRIPTION: Be part ...
Date Posted: 04/01/2026 Recommended
-
Field Turbine Operator
Midland, TX
Job Title: Field Turbine Operator Location: Midland, TX Type: Direct Hire Compensation: $38/hr plus or minus Contractor Work Model: Onsite – onsite Hours: 40.0 hours per week Security Clearance: Not specified Responsibilities Ensure the safe, efficient...
Date Posted: 06/02/2026 Recommended
-
Turbine Auxiliary Operator
Red Lake, Texas
Job Title: Turbine Auxiliary Operator Location: San Antonio, Texas Type: Contract Compensation: $55 hourly (+/-) Contractor Work Model: Onsite Hours: 12 hours shifts (both day shift and night shift are available) Security Clearance: Background clearanc...
Date Posted: 04/24/2026 Recommended
-
Rail Services Technician
Landover Hills, NY
Job Title: Rail Services Technician Location: Landover Hills, NY Type: Direct Hire Compensation: $24 - $36 hourly Contractor Work Model: Onsite OVERVIEW: The successful candidate will have previous knowledge within a maintenance and engineering environ...
Date Posted: 04/14/2026 Recommended
-
Maintenance Tech-Multi
Hubbard, OH
Job Title: Maintenance Tech-Multi Location: Hubbard, OH Type: Direct Hire Compensation: $58240 annually Contractor Work Model: Onsite Hours: Multiple shifts candidates should be able to work any (8am-4pm Mon-Wed, 6am-2pm Thu-Fri, 8pm-6am Tue-Sat, 10pm-...
Date Posted: 05/06/2026 Recommended
-
Signal Technician
Pearl City, Hawaii
Job Title: Signal Technician Location: Pearl City, Hawaii Type: Direct Hire Compensation: $28.37/hr Contractor Work Model: Onsite – onsite Hours: The role requires flexibility and efficiency which require shift rotation, weekends and holidays work typi...
Date Posted: 04/23/2026 Recommended
-
Manufacturing Facility Technician
Quincy, MA
Title: Manufacturing Facilities Technician Location: Quincy, MA area Hours / Schedule: Mon-Fri; 6am-2:30pm (with occasional OT available) Type: Direct Hire Responsibilities Working under the direction and supervision of others, perform routine inspecti...
Date Posted: 06/03/2026 Recommended
-
Welding Technician
Elmira, New York
Job Title: Welding Technician Location: Elmira, New York Type: Direct Hire Compensation: $22 - $28 annually Contractor Work Model: Onsite Hours: First Shift Our client is an international market leader for the design, manufacture, maintenance and suppl...
Date Posted: 04/06/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $42.32; Note: all new hires begin at Level I. Advancement to Level II & III is dependent on work p...
Date Posted: 05/14/2026 Recommended
-
Metrology/Incoming Inspection Supervisor
Orangeburg, NY
Job Title: Metrology / Incoming Inspection Supervisor Location: Blauvelt, NY Employment Type: Contract, 6 months+ Opportunity to convert to direct hire Work Model: Onsite Hours: 7:30 am-4 pm Monday-Friday Compensation: $50.00 – $55.00 per hour Overview...
Date Posted: 06/01/2026 Recommended
-
Temporary Maintenance Mechanic
Lakewood, NJ
Job Title: Temporary Maintenance Mechanic Location: Lakewood, NJ Type: Contract To Hire Compensation: $25.00 - $30.00 per hour Contractor Work Model: Onsite – onsite Hours: Monday-Friday 8:00 am till 4:30 pm Temporary Maintenance Mechanic Responsibilit...
Date Posted: 06/01/2026 Recommended
-
Machine Operator Tier 1 - 3rd Shift
Chanhassen, MN
Job Title: Machine Operator Tier 1 - 3rd Shift Location: Chanhassen, MN Type: Contract Compensation: Contractor Work Model: On-Site Hours: 40.0 hours per week Security Clearance: Moderate Risk Public Trust (MRPT) clearance from the U.S. State Departmen...
Date Posted: 05/29/2026 Recommended
-
Maintenance Mechanic
Lakewood, NJ
Job Title: Maintenance Mechanic Location: Lakewood, NJ Type: Contract To Hire Compensation: $25.00 - $30.00 per hour Contractor Work Model: Onsite – onsite Hours: Monday-Friday 8:00 am till 4:30 pm Responsibilities Perform a wide range of maintenance a...
Date Posted: 06/01/2026 Recommended
-
I&C Technician
Rochester, NY
I&C Technician (Instrumentation & Controls) Location: Rochester, NY Work Model: Onsite Schedule: Day shift | 8-hour shifts | 40 hours/week (overtime available) Pay Range: $26–$37/hour Position Summary The I&C Technician installs, maintains, troubleshoo...
Date Posted: 04/07/2026 Recommended
-
Lead Mechanic
Dayton , NJ
Job Title: Lead Mechanic Location: Dayton, NJ Type: Direct Hire Compensation: Up to $40 per hour Contractor Work Model: Onsite – onsite Hours: 7 AM- 3:30 PM Overview Responsibilities Oversee and support the maintenance, troubleshooting, and optimizatio...
Date Posted: 05/15/2026 Recommended
-
Maintenance Technician
Eatontown, NJ
Job Title: Maintenance Technician Location: Eatontown, NJ Type: Direct Hire Compensation: $28 - $30 per hour + some overtime Contractor Work Model: Onsite Available Shifts: 2nd or 3rd 2nd shift = Monday - Friday, 2:00 PM - 10:30 PM 3rd shift = Sunday n...
Date Posted: 04/16/2026 Recommended
-
Maintenance Technician
Austintown, Ohio
Job Title: Maintenance Technician Location: Austintown, OH Type: Direct Hire Contractor Work Model: Onsite – onsite Hours: 40.0; 2nd shift Overview Maintain and optimize manufacturing equipment and facilities through skilled multi-craft maintenance, en...
Date Posted: 05/21/2026 Recommended
-
Machine Operator Tier 1 - First Shift
Chanhassen, MN
Job Title: Machine Operator Tier 1 - First Shift Location: Chanhassen, MN Type: Contract Compensation: $22.00 / hour Contractor Work Model: On-Site Hours: 6:00 am - 2:30 pm, Monday - Friday, with mandatory overtime every other Saturday Security Clearan...
Date Posted: 05/28/2026 Recommended
-
Maintenance Technician
Latrobe, Pennsylvania
Job Title: Maintenance Technician Location: Latrobe, PA Type: Direct-Hire Compensation: 55K-65K Contractor Work Model: Onsite Hours: 8AM-5PM, Mon-Fri Maintenance Technician Objective Our facility seeks a 1st Shift/Daylight maintenance professional to s...
Date Posted: 03/13/2026 Recommended
-
Field Service Technician
Cranberry Township, Pennsylvania
Job Title: Field Service Technician Location: Cranberry Township, Pennsylvania Type: Contract To Hire Compensation: $25- $27/hr Contractor Work Model: Onsite Objective Deliver field-based technical support and repair services for specialized industrial...
Date Posted: 03/26/2026 Recommended
-
Electrical, Instrumentation & Controls Engineer
New Castle, Delaware
Job Title: Electrical, Instrumentation & Controls Engineer Location: New Castle, Delaware Type: Direct Hire Compensation: $95000 - $125000 annually Contractor Work Model: Onsite Job Summary: The Electrical, Instrumentation & Controls Engineer is respon...
Date Posted: 04/27/2026 Recommended
-
Superintendent- Commercial Construction Projects (Hospitals)
Wilmington , North Carolina
Job Title: Superintendent- Commercial Construction Projects (Hospitals) Location: Wilmington, North Carolina Type: Direct Hire Compensation: $105,000.00 - $115,000.00 Contractor Work Model: Onsite – onsite Overview The Traveling Superintendent is respo...
Date Posted: 05/16/2026 Recommended
-
Generator Technician
Midland, TX
Job Title: Generator Technician Location: Midland, TX Type: Contract-To-Hire Contractor Work Model: Onsite Looking for a fresh start in 2026? System One is actively seeking a skilled Generator Technician for a contract-to-hire opportunity with a reputa...
Date Posted: 05/19/2026 Recommended
-
Line Leader II - 2nd Shift
Macungie, PA
Job Title: Line Leader II - 2nd Shift Location: Macungie, PA 18062 Type: Contract To Hire Contractor Work Model: Onsite Hours: 40.0 (shift: M-F 3:00 PM-11:00 PM) Responsibilities Assist in directing employees’ activities within an assigned manufacturin...
Date Posted: 05/29/2026 Recommended
-
Rail Vehicle Electrical Technician
Hagerstown, Maryland
Job Title: Rail Vehicle Electrical Technician Location: Hagerstown, Maryland Type: Contract To Hire Compensation: $20 - $21 hourly Contractor Work Model: Onsite Hours: 7:00am - 3:30pm Rail Vehicle Electrical Technician performs skilled, installation, a...
Date Posted: 04/22/2026 Recommended