Controls & Instrumentation Engineer
Lake Mary, FL
Experience: 0
Category: Engineering
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 100000.00 - 150000.00 Per Hour
Job ID: 344957
Date Posted: 01/13/2026
Shortcut: http://jobs.systemone.com/UbIRGk
Job Title: Controls & Instrumentation Engineer
Location: Lake Mary, FL
Role Overview
The Instrumentation & Controls Engineer will be responsible for:
Specification and procurement of Instrumentation for large frame Gas Turbines.
Creation and maintenance of all supporting Instrument documentation.
Maintenance of Gas Turbine Control Logic documentation.
Support Project Engineering in addressing all Customer GT instrumentation and
Bid assessment and support for new gas turbine builds.
Key Responsibilities:
Determination of Customer Instrumentation and Control contract requirements and delivery dates.
Creation of Instrumentation procurement schedule.
Creation of Instrument technical specifications and Request for Quotes.
Verification of Supplier quotes.
Verification of all instrumentation against system P&IDs and Instrument list creation.
Instrument loop creation and maintenance.
Data sheet creation for instrumentation.
Drawing creation for instrumentation.
Responsible for all design input documents needed in the creation of an I/O list.
Liaising with clients, suppliers, contractors, project management and other relevant authorities within cost and time constrained environments.
Collaborating with design engineers, operations engineers, purchasers, sales & marketing and other internal staff
Resolution of customer comments on all responsible drawings.
Creation and maintenance of I&C procedures and checklists.
Troubleshooting and problem-solving at various project sites
Understanding and ensuring compliance with the technical standards of the country in which work is undertaken.
Interpret and apply applicable codes like ISA, ANSI/NEMA, NFPA, AGA, etc.
New Vendor qualification if required.
Perform other such duties as may be assigned
Desirable Experience but Not Required:
Experience and general understanding of Smart Plant Instrumentation (SPI), Smart Plant 3D (S3D).
Conduct Factory Acceptance Tests (FATs) for instrumentation if required.
When necessary supporting Field Operations in performing on-site installation of instrumentation.
Provide start-up commissioning, operations and/or troubleshooting support for equipment failures and determine root cause analysis and implement solutions.
Requirement
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Bachelor's degree (BS) in Engineering from four-year college or university; and at least three (3) years related experience and/or training; or equivalent combination of education and experience in specific I&C disciplines as applicable to power plants.
- Netmation, MK5, MK6, Complicity, T3000, R3000, SIMATIC, Ovataion, Delta V, graphic screens
- Key words for applicable instrumentation skill set: Pressure transmitter, switches, gages, Control Valve, Thermocouple, RTD, vibration, speed, positioner, LVDT, Level, position, calorie meter, CEMS, emissions.
- Key words for applicable plant control system skill set: Balance of Plant (BoP), I/O count, I/O list, signal interface, remote I/O, wiring, Combine cycle plant operation, High performance graphics
- Key words standalone: SPI, Smart plant
- Travel – up to 15%
System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.
System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.
#M1
#LI-MA2
#DI-
Ref: #223-Eng Orlando
-
I/O Technician
Claude, Texas
Job Title: I/O Technician Location: Claude, TX Job Summary The I/O Technician is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, power, lightin...
Date Posted: 03/12/2026 Recommended
-
I/O Technician
Austin, Texas
I/O Technician *** THIS POSITION IS BASED IN CLAUDE, TX 79019 *** System One is seeking I/O Technicians to be responsible for the installation, commissioning and testing of the control systems used in the data center. This includes monitoring and contr...
Date Posted: 03/04/2026 Recommended
-
I/O Technician
San Antonio, Texas
I/O Technician *** THIS POSITION IS BASED IN CLAUDE, TX 79019 *** System One is seeking I/O Technicians to be responsible for the installation, commissioning and testing of the control systems used in the data center. This includes monitoring and contr...
Date Posted: 03/04/2026 Recommended
-
I/O Technician
Houston, Texas
I/O Technician *** THIS POSITION IS BASED IN CLAUDE, TX 79019 *** System One is seeking I/O Technicians to be responsible for the installation, commissioning and testing of the control systems used in the data center. This includes monitoring and contr...
Date Posted: 03/04/2026 Recommended
-
I/O Technician
Dallas, Texas
I/O Technician *** THIS POSITION IS BASED IN CLAUDE, TX 79019 *** System One is seeking I/O Technicians to be responsible for the installation, commissioning and testing of the control systems used in the data center. This includes monitoring and contr...
Date Posted: 03/04/2026 Recommended
-
I/O Technician
Oklahoma City, Oklahoma
I/O Technician *** THIS POSITION IS BASED IN CLAUDE, TX 79019 *** System One is seeking I/O Technicians to be responsible for the installation, commissioning and testing of the control systems used in the data center. This includes monitoring and contr...
Date Posted: 03/04/2026 Recommended
-
I/O Technician
Colorado City, Texas
Job Title: I/O Technician Location: Colorado City, TX Job Summary The I/O Technician is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, power, ...
Date Posted: 03/06/2026 Recommended
-
I/O Technician
Abilene, Texas
Job Title: I/O Technician Location: Claude, TX Job Summary The I/O Technician is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, power, lightin...
Date Posted: 03/06/2026 Recommended
-
I/O Technician
Midland, Texas
Job Title: I/O Technician Location: Claude, TX Job Summary The I/O Technician is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, power, lightin...
Date Posted: 03/06/2026 Recommended
-
I/O Technician
Amarillo, Texas
Job Title: I/O Technician Location: Claude, TX Job Summary The I/O Technician is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, power, lightin...
Date Posted: 03/06/2026 Recommended
-
I/O Technician
Lubbock, Texas
Job Title: I/O Technician Location: Claude, TX Job Summary The I/O Technician is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, power, lightin...
Date Posted: 03/06/2026 Recommended
-
Wind Turbine Technician - O&M
Houston, Texas
JOB TITLE: Wind Turbine Technician LOCATION: Various locations across the USA, 100% Travel. JOB TYPE: Contract, Project to Project. COMPENSATION: Pay based on experience. $140 Per Diem. PPE and free training. Truck (after MVR and if need it) with maint...
Date Posted: 02/11/2026 Recommended
-
Electrical, Instrumentation & Controls Engineer
New Castle, Delaware
Job Title: Electrical, Instrumentation & Controls Engineer Location: New Castle, Delaware Type: Direct Hire Compensation: $95000 - $125000 annually Contractor Work Model: Onsite Job Summary: The Electrical, Instrumentation & Controls Engineer is respon...
Date Posted: 02/09/2026 Recommended
-
I&C Design Engineer
Bellevue, WA
Job Title: Design Engineer Type: Contract Compensation: $52 - $85 hourly Contractor Work Model: Remote Overview: We are seeking a talented and experienced Design Engineer specializing in Instrumentation and Control (I&C) for a contract opportunity with...
Date Posted: 01/05/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $38.71; E/I & C Level II: $40.88; E/I & C: Level III: $43.04; Senior E/I & C Technician: $45.04. N...
Date Posted: 01/08/2026 Recommended
-
Instrumentation & Controls (I&C) Design Engineer
Bellevue, WA
I&C Design Engineer Company: System One Location: Remote Pay Rate: $69 – $115 per hour (based on experience) Job Type: Contract Duration: Long-Term Contract Position Overview System One is seeking an experienced Instrumentation & Controls (I&C) Design ...
Date Posted: 03/09/2026 Recommended
-
I&C Design Engineer Lead
Bellevue, WA
System One is seeking an experienced Instrumentation & Controls (I&C) Design Engineer to support advanced nuclear reactor development. This contract position supports system design, prototype development and testing, plant-level system integration, and...
Date Posted: 02/23/2026 Recommended
-
Test Design Engineer
Bellevue, WA
Job Title: Test Design Engineer Location: Bellevue, WA Type: Long-term Contract Contractor Work Model: Remote or Onsite Position Overview: We are seeking a highly motivated and skilled Test Design Engineer to join our Instrumentation and Control (I&C) ...
Date Posted: 02/23/2026 Recommended
-
E & I Tech
Tulsa , Oklahoma
E&I Technician – Mill We are working with a client seeking a skilled Instrumentation & Electrical (E&I) Technician to support mill operations by ensuring reliable, efficient, and safe performance of all electrical and control systems. This role offers ...
Date Posted: 03/09/2026 Recommended
-
E&I Tech
Pryor, Oklahoma
E&I Technician – Mill Working with a client seeking a skilled Instrumentation & Electrical (E&I) Technician to support mill operations by ensuring reliable, efficient, and safe performance of all electrical and control systems. This role offers strong ...
Date Posted: 02/27/2026 Recommended
-
Controls Technician
Hubbard, Ohio
Job Title: Controls Technician Location: Hubbard, Ohio Type: Direct Hire Compensation: $74,880 - $83,200 annually Contractor Work Model: Onsite Hours: Weekday and weekend shifts, candidates should be able to work either (6am-4pm or 8pm-6am Mon-Thu, 6am...
Date Posted: 02/09/2026 Recommended
-
Chemist I
Wilson, NC
Job Title: Chemist I Location: Wilson, NC Type: Contract Contractor Work Model: Onsite Hours: 10-hour shifts, Monday-Thursday, 7:00 AM – 5:30 PM, with some flexibility in start time Pay Rate: $25/hr Responsibilities Perform a variety of chemical analys...
Date Posted: 03/11/2026 Recommended
-
Utilities / Operations Maintenance Coordinator
Spring Grove, PA
Job Title: Operations / Utilities Maintenance Coordinator Location: Spring Grove, PA Type: Direct Hire Contractor Work Model: Onsite Job Description The Utilities Operations Maintenance Coordinator (OMC) is the primary contact between the Maintenance D...
Date Posted: 01/25/2026 Recommended
-
Stationary Engineer III
Tulsa , Oklahoma
Job Title: Stationary Engineer III Location: Tulsa, Oklahoma This position reports directly to the Manager of Central Plant Operations and is responsible for performing routine and emergency tasks involving the operation, maintenance, and repair of hea...
Date Posted: 03/05/2026 Recommended
-
Technical Support Analyst II
Tulsa , Oklahoma
Overview We are seeking a skilled and customer-focused Technical Support Analyst II to provide advanced technical support to end-users. This role serves as the escalation point for complex issues that cannot be resolved at the Tier I level. The ideal c...
Date Posted: 03/10/2026 Recommended
-
Mix Operator
Lakewood, New Jersey
Job Title: Mix Operator Location: Lakewood, New Jersey Type: Contract To Hire Compensation: $23 hourly Contractor Work Model: Onsite Hours: 2nd Shift | Monday-Friday, 1:00 pm till 9:30 pm (Will train on 1st shift for 1-2 weeks) Mix Operator Responsibil...
Date Posted: 03/03/2026 Recommended
-
QC Lab Technician
East Hanover, New Jersey
Job Title: QC Lab Technician Location: East Hanover, New Jersey Type: Contract Compensation: $25.00 - $31.00 Contractor Work Model: Onsite Hours: Mon - Friday, 8 am to 4:30 pm (occasional Saturday) Responsibilities Conduct chemical and physical laborat...
Date Posted: 03/06/2026 Recommended
-
System Design Engineer, Sodium Cover Gas System
Bellevue, WA
Job Title: System Design Engineer, Sodium Cover Gas System Location: Bellevue, WA Type: Contract (yearlong) typically extends on a yearly basis Compensation: $52.00 - $85.00 hourly Contractor Work Model: Fully Remote (US based) Paid Holidays | PTO Syst...
Date Posted: 03/06/2026 Recommended
-
LC-MS Research Scientist
Pittsburgh, PA
Title: LC-MS Research Scientist Location: Onsite, Pittsburgh, PA 15213 Type: 6-month contract to hire Hours: 8AM-5PM Start: January Overview: Join as a Research Scientist to will be responsible for developing, optimizing, and validating LC-MS assays to...
Date Posted: 01/21/2026 Recommended
-
QC Analyst
Orangeburg, NY
Job Title: QC Analyst - Medical Device Location: Orangeburg, NY Type: Contract Compensation: $23.00 per hour Contractor Work Model: Onsite Hours: (6:00am-2:30pm) Responsibilities Performs analyses of Clinical Chemistry, Critical Care, coagulation, and ...
Date Posted: 03/13/2026 Recommended