Controls & Instrumentation Engineer
Lake Mary, FL
Experience: 0
Category: Engineering
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 100000.00 - 150000.00 Per Hour
Job ID: 344957
Date Posted: 01/13/2026
Shortcut: http://jobs.systemone.com/7FoQqg
Job Title: Controls & Instrumentation Engineer
Location: Lake Mary, FL
Role Overview
The Instrumentation & Controls Engineer will be responsible for:
Specification and procurement of Instrumentation for large frame Gas Turbines.
Creation and maintenance of all supporting Instrument documentation.
Maintenance of Gas Turbine Control Logic documentation.
Support Project Engineering in addressing all Customer GT instrumentation and
Bid assessment and support for new gas turbine builds.
Key Responsibilities:
Determination of Customer Instrumentation and Control contract requirements and delivery dates.
Creation of Instrumentation procurement schedule.
Creation of Instrument technical specifications and Request for Quotes.
Verification of Supplier quotes.
Verification of all instrumentation against system P&IDs and Instrument list creation.
Instrument loop creation and maintenance.
Data sheet creation for instrumentation.
Drawing creation for instrumentation.
Responsible for all design input documents needed in the creation of an I/O list.
Liaising with clients, suppliers, contractors, project management and other relevant authorities within cost and time constrained environments.
Collaborating with design engineers, operations engineers, purchasers, sales & marketing and other internal staff
Resolution of customer comments on all responsible drawings.
Creation and maintenance of I&C procedures and checklists.
Troubleshooting and problem-solving at various project sites
Understanding and ensuring compliance with the technical standards of the country in which work is undertaken.
Interpret and apply applicable codes like ISA, ANSI/NEMA, NFPA, AGA, etc.
New Vendor qualification if required.
Perform other such duties as may be assigned
Desirable Experience but Not Required:
Experience and general understanding of Smart Plant Instrumentation (SPI), Smart Plant 3D (S3D).
Conduct Factory Acceptance Tests (FATs) for instrumentation if required.
When necessary supporting Field Operations in performing on-site installation of instrumentation.
Provide start-up commissioning, operations and/or troubleshooting support for equipment failures and determine root cause analysis and implement solutions.
Requirement
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Bachelor's degree (BS) in Engineering from four-year college or university; and at least three (3) years related experience and/or training; or equivalent combination of education and experience in specific I&C disciplines as applicable to power plants.
- Netmation, MK5, MK6, Complicity, T3000, R3000, SIMATIC, Ovataion, Delta V, graphic screens
- Key words for applicable instrumentation skill set: Pressure transmitter, switches, gages, Control Valve, Thermocouple, RTD, vibration, speed, positioner, LVDT, Level, position, calorie meter, CEMS, emissions.
- Key words for applicable plant control system skill set: Balance of Plant (BoP), I/O count, I/O list, signal interface, remote I/O, wiring, Combine cycle plant operation, High performance graphics
- Key words standalone: SPI, Smart plant
- Travel – up to 15%
System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.
System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.
#M1
#LI-MA2
#DI-
Ref: #223-Eng Orlando
-
I&C Design Engineer
Bellevue, WA
Job Title: Design Engineer Type: Contract Compensation: $52 - $85 hourly Contractor Work Model: Remote Overview: We are seeking a talented and experienced Design Engineer specializing in Instrumentation and Control (I&C) for a contract opportunity with...
Date Posted: 01/05/2026 Recommended
-
Plant Instrument and Controls Tech/Instrument Engineer
West Deptford, New Jersey
Job Title: Plant Instrument and Controls Tech/Instrument Engineer Location: West Deptford, New Jersey Type: Contract Compensation: $30 - $35 hourly Contractor Work Model: Onsite Responsibilities: - A key member of our Team supporting industrial instrum...
Date Posted: 01/30/2026 Recommended
-
I&C Design Engineer Lead
Bellevue, WA
System One is seeking an experienced Instrumentation & Controls (I&C) Design Engineer to support advanced nuclear reactor development. This contract position supports system design, prototype development and testing, plant-level system integration, and...
Date Posted: 02/23/2026 Recommended
-
Chemist I
Wilson, NC
Job Title: Chemist I Location: Wilson, NC Hours / Schedule: Monday - Thursday, 7am - 5:30pm, 10 hr shifts with some flexibility in start time Type: Contract Responsibilities Performs a variety of chemical analyses and GMP review in accordance with cGMP...
Date Posted: 12/23/2025 Recommended
-
Wind Turbine Technician - O&M
Houston, Texas
JOB TITLE: Wind Turbine Technician LOCATION: Various locations across the USA, 100% Travel. JOB TYPE: Contract, Project to Project. COMPENSATION: Pay based on experience. $140 Per Diem. PPE and free training. Truck (after MVR and if need it) with maint...
Date Posted: 02/11/2026 Recommended
-
Hardware Engineer I
Arlington, TX
Job Title: Hardware Engineer Location: Arlington, TX (onsite) Type: Contract Compensation: $34.00 hourly Security Clearance: Active Secret clearance required. (Must be able to obtain an NRC Public Trust Security Clearance before starting which may take...
Date Posted: 02/24/2026 Recommended
-
Electrical, Instrumentation & Controls Engineer
New Castle, Delaware
Job Title: Electrical, Instrumentation & Controls Engineer Location: New Castle, Delaware Type: Direct Hire Compensation: $95000 - $125000 annually Contractor Work Model: Onsite Job Summary: The Electrical, Instrumentation & Controls Engineer is respon...
Date Posted: 02/09/2026 Recommended
-
I&C Technician
Oak Ridge, Tennessee
Job Title: I&C Technician Location: Oak Ridge, Tennessee Type: Direct Hire Contractor Work Model: Onsite System One is seeking an I&C Technician for a direct hire opportunity based in Oak Ridge, TN. In this pivotal role, you will play an integral part ...
Date Posted: 02/25/2026 Recommended
-
I&C Manufacturing Engineer
Corvillas, OR
Job Title: Remote I&C Manufacturing Engineer Location: Corvallis, OR Type: Direct Hire Salary: $111,000 – $134,000 Work Model: Remote with 10–25% travel System One is seeking an I&C Manufacturing Engineer to support nuclear instrumentation and control ...
Date Posted: 02/23/2026 Recommended
-
OMICS Laboratory Manager I
Pittsburgh, PA
Title: OMICS Laboratory Manager I Location: Onsite, Pittsburgh, PA 15219 Type: 6-month contract to hire Hours: 8AM-5PM Start: December Overview: Join as a Laboratory Manager I to manage day-to-day laboratory operations while ensuring compliance with sa...
Date Posted: 02/20/2026 Recommended
-
Engineering Technician I, II, III
Vinita, OK
Job Title: Engineering Technician Location: Vinita, OK Work Model: Hybrid Overview The Engineering Technician supports the design, drafting, configuration, and documentation of substation relaying and metering systems. Working under supervision, this r...
Date Posted: 02/25/2026 Recommended
-
Mortgage Assumption Specialist I
Winchester, VA
Job Title: Mortgage Assumption Specialist Location: Winchester, VA Shift (Time): 8:00am - 4:30pm EST; hybrid (onsite 2-3 days a week) Pay Rate: Open to Both C2C and W2 options Position Type: Multiyear Contract This role supports the processing of mortg...
Date Posted: 02/23/2026 Recommended
-
Electrical Engineer I, II, III
Vinita, OK
Job Title: Electrical Engineer Location: Vinita, OK Work Model: Hybrid Overview The Electrical Engineer provides technical support for substation relaying, metering design, system protection, communications configuration, and NERC compliance activities...
Date Posted: 02/25/2026 Recommended
-
Nuclear Project Manager (I&C)
Houston, Texas
System One is seeking Project Manager for a long-term contract role who will lead a diverse team with various departments to advance our client’s Small Modular Reactor design, fabrication and deployment. This position focuses on development scope for P...
Date Posted: 02/23/2026 Recommended
-
Electronics Technician I
Hackettstown, NJ
Job Title: Electronics Technician I Location: Hackettstown, NJ Type: Contract To Hire Compensation: $18 - $20 hourly Contractor Work Model: Onsite Hours: 7a-3:30p, M-F Requirements Associate’s degree in Electronics or equivalent experience preferred Co...
Date Posted: 01/09/2026 Recommended
-
Talent Acquisition Recruiter I
San Antonio, TX
Talent Acquisition Recruiter San Antonio, TX Start Date: ASAP Duration: 6 months. Contract to Direct Hire Possible Pay Rate: $25.00 Work Schedule: Monday - Friday 8am - 5pm Position Summary: The primary function of this position is to deliver a high le...
Date Posted: 02/09/2026 Recommended
-
Electrical I&C Engineering Supervisor, Nuclear
Naperville, Illinois
Job Title: Electrical I&C Engineering Supervisor, Nuclear Location: Naperville, Illinois or Atlanta, GA Type: Direct Hire Contractor Work Model: Hyrbrid or Remote We are seeking an experienced Electrical I&C Engineering Supervisor to join a dynamic tea...
Date Posted: 02/11/2026 Recommended
-
Nuclear Digital I&C IV&V Engineer
Corvallis, Oregon
Job Title: Nuclear Digital I&C IV&V Engineer Location: Corvallis, Oregon Type: Contract Contractor Work Model: Remote Job Description: Are you an expert in Independent Verification and Validation (IV&V) with a passion for ensuring the safety and reliab...
Date Posted: 02/23/2026 Recommended
-
Quality Control Analyst, I
Cambridge, Massachusetts
Title: Quality Control Analyst, I Location: Cambridge MA moving to Burlington MA Duration: 6 month contract to hire Start: ASAP Schedule: Monday thru Friday (flex start) 40 hour work week Salary: $32 to $38/hr based on experience Education: BS plus 0-2...
Date Posted: 02/19/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $38.71; E/I & C Level II: $40.88; E/I & C: Level III: $43.04; Senior E/I & C Technician: $45.04. N...
Date Posted: 01/08/2026 Recommended
-
Manufacturing Technician I & II
Tulsa, OK
Working with a local client to find some CONTRACT Manufacturing techs (6 month Contract) Manufacturing Technician 1 & II Perform technical mechanical work using standard hand tools and inspection equipment. Operate equipment for sheet metal fabrication...
Date Posted: 02/17/2026 Recommended
-
Electrical & Instrument Technician
Savannah, Georgia
Job Title: Electrical & Instrumentation Technician Location: Savannah, GA Hours/Schedule: Monday–Friday, 7:00 am to 3:30 pm Type: Contract Overview This role provides advanced electrical and instrumentation troubleshooting, maintenance, and technical s...
Date Posted: 01/29/2026 Recommended
-
Controls Technician
Hubbard, Ohio
Job Title: Controls Technician Location: Hubbard, Ohio Type: Direct Hire Compensation: $74,880 - $83,200 annually Contractor Work Model: Onsite Hours: Weekday and weekend shifts, candidates should be able to work either (6am-4pm or 8pm-6am Mon-Thu, 6am...
Date Posted: 02/09/2026 Recommended
-
Multimedia Designer I
Pensacola, FL
Job Title: Mortgage Assumption Specialist I Location: Hybrid, Winchester, VA or Pensacola, FL Shift (Time): 8:00am - 4:30pm EST (local time) Pay Rate: Open to Both C2C and W2 options Position Type: Multiyear Contract The Multimedia Design Contractor ca...
Date Posted: 02/24/2026 Recommended
-
Test Design Engineer
Bellevue, WA
Job Title: Test Design Engineer Location: Bellevue, WA Type: Long-term Contract Contractor Work Model: Remote or Onsite Position Overview: We are seeking a highly motivated and skilled Test Design Engineer to join our Instrumentation and Control (I&C) ...
Date Posted: 02/23/2026 Recommended
-
Utilities / Operations Maintenance Coordinator
Spring Grove, PA
Job Title: Operations / Utilities Maintenance Coordinator Location: Spring Grove, PA Type: Direct Hire Contractor Work Model: Onsite Job Description The Utilities Operations Maintenance Coordinator (OMC) is the primary contact between the Maintenance D...
Date Posted: 01/25/2026 Recommended
-
Senior Controls Automation Engineer
Cannonsburg, Pennsylvania
Job Title: Senior Controls Automation Engineer Location: Cannonsburg, Pennsylvania Type: Direct Hire Compensation: $140000 - $155000 annually Contractor Work Model: Onsite System One is currently seeking a Senior Automation Engineer on a direct hire po...
Date Posted: 12/05/2025 Recommended
-
Maintenance Mechanic
Millsboro, Delaware
Job Title: Maintenance Mechanic Location: Millsboro, Delaware Type: Direct Hire Work Model: Onsite Maintenance Mechanic Essential Job Functions and Duties Install, assemble, and test new machines and equipment. Schedule and perform routine preventative...
Date Posted: 02/04/2026 Recommended
-
Global Supplier Quality Management Representative
Indianapolis, IN
Job Name: Global Supplier Quality Management Representative Location: Indianapolis, IN Work Schedule: Mon - Fri 8am - 5pm Pay Range: $32.60 - $38.35 Type: Contract, Potential for extension or conversion to permanent Overview: The Global Supplier Qualit...
Date Posted: 12/08/2025 Recommended
-
System Design Engineer, Sodium Cover Gas System
Bellevue, WA
Job Title: System Design Engineer, Sodium Cover Gas System Location: Bellevue, WA Type: Contract (yearlong) typically extends on a yearly basis Compensation: $52.00 - $85.00 hourly Contractor Work Model: Fully Remote (US based) Paid Holidays | PTO Syst...
Date Posted: 02/12/2026 Recommended