Controls & Instrumentation Engineer
Lake Mary, FL
Experience: 0
Category: Engineering
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 100000.00 - 150000.00 Per Hour
Job ID: 344957
Date Posted: 01/13/2026
Shortcut: http://jobs.systemone.com/SbcO5L
Job Title: Controls & Instrumentation Engineer
Location: Lake Mary, FL
Role Overview
The Instrumentation & Controls Engineer will be responsible for:
Specification and procurement of Instrumentation for large frame Gas Turbines.
Creation and maintenance of all supporting Instrument documentation.
Maintenance of Gas Turbine Control Logic documentation.
Support Project Engineering in addressing all Customer GT instrumentation and
Bid assessment and support for new gas turbine builds.
Key Responsibilities:
Determination of Customer Instrumentation and Control contract requirements and delivery dates.
Creation of Instrumentation procurement schedule.
Creation of Instrument technical specifications and Request for Quotes.
Verification of Supplier quotes.
Verification of all instrumentation against system P&IDs and Instrument list creation.
Instrument loop creation and maintenance.
Data sheet creation for instrumentation.
Drawing creation for instrumentation.
Responsible for all design input documents needed in the creation of an I/O list.
Liaising with clients, suppliers, contractors, project management and other relevant authorities within cost and time constrained environments.
Collaborating with design engineers, operations engineers, purchasers, sales & marketing and other internal staff
Resolution of customer comments on all responsible drawings.
Creation and maintenance of I&C procedures and checklists.
Troubleshooting and problem-solving at various project sites
Understanding and ensuring compliance with the technical standards of the country in which work is undertaken.
Interpret and apply applicable codes like ISA, ANSI/NEMA, NFPA, AGA, etc.
New Vendor qualification if required.
Perform other such duties as may be assigned
Desirable Experience but Not Required:
Experience and general understanding of Smart Plant Instrumentation (SPI), Smart Plant 3D (S3D).
Conduct Factory Acceptance Tests (FATs) for instrumentation if required.
When necessary supporting Field Operations in performing on-site installation of instrumentation.
Provide start-up commissioning, operations and/or troubleshooting support for equipment failures and determine root cause analysis and implement solutions.
Requirement
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Bachelor's degree (BS) in Engineering from four-year college or university; and at least three (3) years related experience and/or training; or equivalent combination of education and experience in specific I&C disciplines as applicable to power plants.
- Netmation, MK5, MK6, Complicity, T3000, R3000, SIMATIC, Ovataion, Delta V, graphic screens
- Key words for applicable instrumentation skill set: Pressure transmitter, switches, gages, Control Valve, Thermocouple, RTD, vibration, speed, positioner, LVDT, Level, position, calorie meter, CEMS, emissions.
- Key words for applicable plant control system skill set: Balance of Plant (BoP), I/O count, I/O list, signal interface, remote I/O, wiring, Combine cycle plant operation, High performance graphics
- Key words standalone: SPI, Smart plant
- Travel – up to 15%
System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.
System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.
#M1
#LI-MA2
#DI-
Ref: #223-Eng Orlando
-
Plant Instrument and Controls Tech/Instrument Engineer
West Deptford, New Jersey
Job Title: Plant Instrument and Controls Tech/Instrument Engineer Location: West Deptford, New Jersey Type: Contract Compensation: $30 - $35 hourly Contractor Work Model: Onsite Responsibilities: - A key member of our Team supporting industrial instrum...
Date Posted: 01/30/2026 Recommended
-
Wind Turbine Technician - O&M
Houston, Texas
JOB TITLE: Wind Turbine Technician LOCATION: Various locations across the USA, 100% Travel. JOB TYPE: Contract, Project to Project. COMPENSATION: Pay based on experience. $140 Per Diem. PPE and free training. Truck (after MVR and if need it) with maint...
Date Posted: 02/11/2026 Recommended
-
Electrical, Instrumentation & Controls Engineer
New Castle, Delaware
Job Title: Electrical, Instrumentation & Controls Engineer Location: New Castle, Delaware Type: Direct Hire Compensation: $95000 - $125000 annually Contractor Work Model: Onsite Job Summary: The Electrical, Instrumentation & Controls Engineer is respon...
Date Posted: 02/09/2026 Recommended
-
I&C Design Engineer
Bellevue, WA
Job Title: Design Engineer Type: Contract Compensation: $52 - $85 hourly Contractor Work Model: Remote Overview: We are seeking a talented and experienced Design Engineer specializing in Instrumentation and Control (I&C) for a contract opportunity with...
Date Posted: 01/05/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $38.71; E/I & C Level II: $40.88; E/I & C: Level III: $43.04; Senior E/I & C Technician: $45.04. N...
Date Posted: 01/08/2026 Recommended
-
I&C Engineer (Remote)
Groton, NE
Job Title: I&C Engineer VI Location: Remote Type: Contract Compensation: DOE Contractor Work Model: Remote Number of positions: 1 Duration: 12 months Non Exempt Work Schedule: 8:00 am - 5:00 pm Category: Engineering Technology System One is hiring an e...
Date Posted: 12/10/2025 Recommended
-
Senior Instrumentation and Control Engineer
Houston, Texas
Senior Instrumentation and Control Engineer 100% Remote System One is seeking an Senior Instrumentation and Control (I&C) Engineer to perform a variety of engineering and design activities involving power plant upgrades and/or new power plant projects....
Date Posted: 02/11/2026 Recommended
-
Test Design Engineer
Bellevue, WA
Job Title: Test Design Engineer Location: Bellevue, WA Type: Long-term Contract Contractor Work Model: Remote or Onsite Position Overview: We are seeking a highly motivated and skilled Test Design Engineer to join our Instrumentation and Control (I&C) ...
Date Posted: 12/15/2025 Recommended
-
Manager- Project Controls
Houston, Texas
Job Title: Manager- Project Controls Location: Houston, Texas (local candidates only) Type: Direct Hire Work Model: Onsite System One is seeking a Manager of Project Controls for a direct-hire role. The candidate will report to Director of PMCoE and ov...
Date Posted: 02/12/2026 Recommended
-
Electrical & Instrument Technician
Savannah, Georgia
Job Title: Electrical & Instrumentation Technician Location: Savannah, GA Hours/Schedule: Monday–Friday, 7:00 am to 3:30 pm Type: Contract Overview This role provides advanced electrical and instrumentation troubleshooting, maintenance, and technical s...
Date Posted: 01/29/2026 Recommended
-
Controls Technician
Hubbard, Ohio
Job Title: Controls Technician Location: Hubbard, Ohio Type: Direct Hire Compensation: $74,880 - $83,200 annually Contractor Work Model: Onsite Hours: Weekday and weekend shifts, candidates should be able to work either (6am-4pm or 8pm-6am Mon-Thu, 6am...
Date Posted: 02/09/2026 Recommended
-
Primary Heat Transport System Design Engineer
Bellevue, WA
Job Title: Primary Heat Transport System Design Engineer Location: Remote Type: Contract (yearlong) typically extends on a yearly basis Compensation: $56 - $95 hourly Contractor Work Model: Remote Paid holidays | PTO System One is seeking a Primary Hea...
Date Posted: 11/24/2025 Recommended
-
Utilities / Operations Maintenance Coordinator
Spring Grove, PA
Job Title: Operations / Utilities Maintenance Coordinator Location: Spring Grove, PA Type: Direct Hire Contractor Work Model: Onsite Job Description The Utilities Operations Maintenance Coordinator (OMC) is the primary contact between the Maintenance D...
Date Posted: 01/25/2026 Recommended
-
Senior Control Systems Engineer
Everett, WA
Job Title: Senior Control Systems Engineer Location: Everett, WA (Local candidates only) Type: Contract (yearlong) typically extends on a yearly basis Compensation: $52 - $85 hourly Contractor Work Model: Onsite Paid Holidays | PTO System One is seekin...
Date Posted: 01/30/2026 Recommended
-
Technical Support Analyst II
Tulsa , Oklahoma
Overview We are seeking a skilled and customer-focused Technical Support Analyst II to provide advanced technical support to end-users. This role serves as the escalation point for complex issues that cannot be resolved at the Tier I level. The ideal c...
Date Posted: 02/02/2026 Recommended
-
I&C Manufacturing Engineer
Corvillas, OR
Job Title: I&C Manufacturing Engineer Location: Corvillas, OR Type: Direct Hire Compensation: $111,000 - $134,000 annually Work Model: Remote with 10-25% travel required System one is hiring a direct full-time I&C Manufacturing Engineer who will be res...
Date Posted: 02/12/2026 Recommended
-
Senior Controls Automation Engineer
Cannonsburg, Pennsylvania
Job Title: Senior Controls Automation Engineer Location: Cannonsburg, Pennsylvania Type: Direct Hire Compensation: $140000 - $155000 annually Contractor Work Model: Onsite System One is currently seeking a Senior Automation Engineer on a direct hire po...
Date Posted: 12/05/2025 Recommended
-
Control Room Operator
Gregory, Texas
Job Title: Control Room Operator Location: Gregory, Texas Type: Contract Compensation: $60 - $70 hourly Contractor Work Model: Onsite Hours: Add the job’s scheduled days and times (delete if not needed) Security Clearance: List security clearance requi...
Date Posted: 02/05/2026 Recommended
-
Maintenance Mechanic
Millsboro, Delaware
Job Title: Maintenance Mechanic Location: Millsboro, Delaware Type: Direct Hire Work Model: Onsite Maintenance Mechanic Essential Job Functions and Duties Install, assemble, and test new machines and equipment. Schedule and perform routine preventative...
Date Posted: 02/04/2026 Recommended
-
Global Supplier Quality Management Representative
Indianapolis, IN
Job Name: Global Supplier Quality Management Representative Location: Indianapolis, IN Work Schedule: Mon - Fri 8am - 5pm Pay Range: $32.60 - $38.35 Type: Contract, Potential for extension or conversion to permanent Overview: The Global Supplier Qualit...
Date Posted: 12/08/2025 Recommended
-
System Design Engineer, Sodium Cover Gas System
Bellevue, WA
Job Title: System Design Engineer, Sodium Cover Gas System Location: Bellevue, WA Type: Contract (yearlong) typically extends on a yearly basis Compensation: $52.00 - $85.00 hourly Contractor Work Model: Fully Remote (US based) Paid Holidays | PTO Syst...
Date Posted: 02/12/2026 Recommended
-
LC-MS Research Scientist
Pittsburgh, PA
Title: LC-MS Research Scientist Location: Onsite, Pittsburgh, PA 15213 Type: 6-month contract to hire Hours: 8AM-5PM Start: January Overview: Join as a Research Scientist to will be responsible for developing, optimizing, and validating LC-MS assays to...
Date Posted: 01/21/2026 Recommended
-
Wind Turbine GE LOTO Technician
Houston, Texas
Job Title Wind Turbine GE (LOTO) Technician Pay Rate Based on experience, Per Diem, Truck and PPE provided Location: Various locations across the USA (100% Travel) Summary System One is currently hiring GE LOTO certified wind technicians. This position...
Date Posted: 02/10/2026 Recommended
-
Controls Automation Engineer
Cannonsburg, Pennsylvania
Job Title: Controls Automation Engineer Location: Cannonsburg, Pennsylvania Type: Direct Hire Compensation: $120000 - $140000 annually Contractor Work Model: Onsite System One is currently seeking a Controls Automation Engineer on a direct hire positio...
Date Posted: 12/05/2025 Recommended
-
Controls Specialist
Abilene, Texas
Job Title: Controls Specialist Location: Abilene, Texas Job Summary The Controls Specialist is responsible for installing, commissioning, and testing control systems within the data center environment. This includes the monitoring and control of HVAC, ...
Date Posted: 12/02/2025 Recommended
-
Packaging Operator
Lakewood, New Jersey
Job Title: Packaging Operator Location: Lakewood, New Jersey Type: Contract To Hire Compensation: $22.50/hr. Will train on 1st shift 2-3 weeks Contractor Work Model: Onsite Hours: 3:00 pm to 11:30 pm Summary: Responsible for the operation of a manufact...
Date Posted: 02/02/2026 Recommended
-
Packaging Operator
Lakewood, New Jersey
Job Title: Packaging Operator Location: Lakewood, New Jersey Type: Contract To Hire Compensation: $21/hr. Contractor Work Model: Onsite Hours: 7:00 am till 3:30 pm Summary: Responsible for the operation of a manufacturing and/or packaging line(s), to e...
Date Posted: 01/22/2026 Recommended
-
Senior Piping Designer
Cannonsburg, Pennsylvania
Job Title: Senior Piping Designer Location: Canonsburg, PA Type: Direct Hire Contractor Work Model: Onsite Hours: 1st shift Senior Piping Designer (Plant 3D) Objective We are seeking an experienced Piping Designer to lead the development of intricate 3...
Date Posted: 12/26/2025 Recommended
-
Metrology Technician
West Point, Pennsylvania
Job Title: Metrology Technician Location: West Point, Pennsylvania Type: Full-time Compensation: $30 - $35 hourly Work Model: Onsite Responsibilities: Provides comprehensive, compliant technical services and support for miscellaneous instrumentation an...
Date Posted: 01/12/2026 Recommended
-
I/E Designer
Katy, TX
Job Title: I/E Designer Location: Katy, TX Type: Contract To Hire Compensation: $40 - $75 hourly Contractor Work Model: Onsite Hours: 8-5 M-F Position: I/E Designer Location: Onsite Job Type: Full-Time Overview We are seeking a detail-oriented and inno...
Date Posted: 02/05/2026 Recommended