Production Associate I- MACHINING- 1ST SHIFT
Commerce City, CO
Experience: 0
Category: Industrial & Manufacturing
Contractor Work Model: Onsite
Brand: System One
Job ID: 345858
Date Posted: 02/04/2026
Shortcut: http://jobs.systemone.com/kLQeZU
Job Title: Production Associate Level I – Machining
Pay Rate: $24/hour
Duration: 6-month contract
Schedule: Monday–Thursday | 6:00 AM – 4:30 PM
Job Summary
The Production Associate Level I – Machining operates machines and production equipment in a manufacturing environment while meeting quality, safety, and productivity standards. This role requires hands-on work with machining equipment, tools, and inspection instruments, with limited supervision.
Machining Responsibilities
Technicians in this area rotate between multiple workstations. Responsibilities include:
-
Power wash cleaning of crankshafts and cylinder blocks
-
Detailed inspection of crankshafts
-
Operation of basic polishing machines
-
Manual cleaning of cylinder block surfaces and threaded holes using power tools and abrasives
-
Detailed inspection of cylinder blocks
-
Use of cranes and basic measurement equipment (e.g., bore gauges, micrometers)
-
Following documented work instructions and procedures
-
Recording process and inspection results as required
-
Operating a milling machine (for more skilled operators)
-
Supporting problem-solving and continuous improvement investigations
-
Performing all tasks in compliance with Health, Safety & Environmental (HSE) requirements
Key Responsibilities
Health, Safety & Environmental (HSE)
-
Stop work and immediately report any major injury hazards
-
Report work-related injuries, illnesses, incidents, or unsafe conditions
-
Comply with all HSE policies, procedures, and regulations
-
Use required personal protective equipment (PPE)
-
Promote a safe, interdependent work culture
-
Correct hazards within scope of control
-
Minimize environmental impact related to work activities
-
Participate in required HSE training
Quality
-
Follow standard work, process documentation, and quality procedures including SPC, poka-yoke, and visual standards
-
Perform quality inspections and identify non-conforming material
-
Raise quality concerns to minimize cost and risk
Production & Equipment
-
Meet required cycle times and engineering standards
-
Maintain a clean and organized work area, including routine housekeeping and machine cleaning
-
Perform planned operator care and basic maintenance tasks
-
Remain flexible and perform additional duties as needed to meet production goals
-
Work with peers, skilled trades, and support staff to identify and address equipment repair needs
Teamwork & Development
-
Communicate effectively with assigned teams and support groups
-
Complete required training and ongoing development
-
Actively participate in continuous improvement efforts related to safety, quality, process, material flow, and employee development
Core Competencies
-
Accountability
-
Effective communication
-
Courage and initiative
-
Results-driven mindset
-
Health and Safety fundamentals
-
Manufacturing knowledge and continuous improvement
Education & Requirements
-
High school diploma or equivalent (or relevant experience meeting regulatory requirements)
-
May require licensing related to export controls or sanctions compliance
-
Ability to stand for extended periods and perform repetitive tasks
-
Comfortable working in a fast-paced, hands-on manufacturing environment
Top Skills Required
-
Machine operation experience
-
Knowledge and use of hand tools
-
Strong communication skills
Ref: #193-Precision Oakridge
-
Production Associate I- DISASSEMBLY/CLEANING AND INSPECTION- 1ST SHIFT
Commerce City, CO
Job title: Production associate – level I (disassembly, cleaning and inspection) Location: Commerce City CO / Pay rate: $23.50 per hour / 1st shift: This is a 12-month position working Monday -Thursday 6am-4:30pm. Job summary: operates machines and pro...
Date Posted: 01/05/2026 Recommended
-
Machinist
Irwin, Pennsylvania
Job Title: Machinists Location: Irwin, PA Type: Direct Hire Compensation: up to $62400 annually Contractor Work Model: Onsite Hours: 1st shift is 6AM-3PM, Monday- Friday The Machinist is responsible for setting up, operating, inspecting, and programmin...
Date Posted: 12/18/2025 Recommended
-
CNC Machinist(s)
Tulsa, OK
CNC Machinist – Claremore Qualifications Education: High School diploma or equivalent required. Essential Functions Set up and operate 3-, 4-, and 5-axis CNC milling machines to machine metallic and nonmetallic components. Review and compare numerical ...
Date Posted: 01/28/2026 Recommended
-
CNC Machinist
Cranberry Township, Pennsylvania
Job Title: CNC Machinist Location: Cranberry Twp, PA Type: Direct Hire Compensation: $30-35/hr Contractor Work Model: Onsite Objective Operate and maintain precision machining equipment to fabricate components according to engineering specifications wh...
Date Posted: 01/26/2026 Recommended
-
Electrical Production Supervisor
Hagerstown, Maryland
Job Title: Electrical Production Supervisor Location: Hagerstown, Maryland Type: Direct Hire Compensation: $75000 - $95000 annually Contractor Work Model: Onsite Hours: 6:30am - 4:00pm System One is seeking an enthusiastic self-motivated Electrical Pro...
Date Posted: 12/18/2025 Recommended
-
Machinist
Turtle Creek, Pennsylvania
Job Title: Machinist Location: Turtle Creek, PA Type: Direct Hire Compensation: $52000 annually Contractor Work Model: Onsite Hours: 1st, 2nd, 3rd Shifts Machinist We are seeking a skilled Machinist to join our production team. The ideal candidate will...
Date Posted: 12/26/2025 Recommended
-
Production Operator
Orangeburg, NY
Job Title: Production Operator Location: Orangeburg, NY Type: Contract to Potential Hire Compensation: $21 - $23 hourly Contractor Work Model: Onsite Hours: 1st or 2nd Shift Experience/"MUST HAVES": Minimum of a High School Diploma or equivalent 1+ yrs...
Date Posted: 01/07/2026 Recommended
-
Production Operator
Orangeburg, NY
Job Title: Production Technician I Location: Orangeburg, NY Start Date: ASAP! Duration: 6+ Month Contract (possible Contract-to-Hire) Hours: Monday-Friday; 3rd shift 11:00pm-7:30am Pay : $20-$23/hour depending upon experience Experience/"MUST HAVES": M...
Date Posted: 01/10/2026 Recommended
-
Machinist
Warren, MI
Job Title: CNC Operator/Machinist Location: Warren, MI Type: Direct Hire Compensation: $22-38/hr Contractor Work Model: Onsite Hours: Day 6am-5pm Mon-Fri 6am-12pm Sat. or Night 5:30pm-6am Mon-Fri 2:30pm-8:30pm . Night Shift 11% shift premium. CNC Opera...
Date Posted: 01/16/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $38.71; E/I & C Level II: $40.88; E/I & C: Level III: $43.04; Senior E/I & C Technician: $45.04. N...
Date Posted: 01/08/2026 Recommended
-
Packaging Operator
East Hanover, New Jersey
Job Title: Packaging Operator Location: East Hanover, New Jersey Type: Contract Compensation: $25/Hour Contractor Work Model: Onsite Hours: 6a-2:30p, M-F Responsibilities Perform packaging operations according to customer orders and production schedule...
Date Posted: 01/11/2026 Recommended
-
Avionics Inspector
Owasso , OK
Job Title: Avionics Inspector Position Summary: System One is partnering with our client in search of an Avionics Inspector. This position plays a vital role in ensuring the safety, reliability, and quality of the company's avionics components, assembl...
Date Posted: 02/04/2026 Recommended
-
Asphalt Paver Operator
York, PA
Job Title: Asphalt Paver Operator Location: York, PA Type: Direct Hire Summary/Overview: Safely runs paving machines to spread and level hot asphalt for roads, parking lots, and driveways, monitoring material flow, coordinating with dump trucks, and pe...
Date Posted: 01/25/2026 Recommended
-
Overhaul Technician
Houston, Texas
Job Title: Overhaul Technician Location: Houston, Texas Type: Direct Hire Compensation: $50000 - $60000 annually Contractor Work Model: Onsite Our client is an international market leader for the design, manufacture, maintenance and supply of equipment...
Date Posted: 01/29/2026 Recommended
-
Mechanical Assembler
Cranberry Township, Pennsylvania
Job Title: Mechanical Assembler Location: Cranberry Twp, PA Type: Contract-to-Hire Compensation: 21-22/hr Contractor Work Model: Onsite Objective Assemble industrial equipment and machine components by following specifications, drawings, and work instr...
Date Posted: 01/27/2026 Recommended
-
Bonding Technician
Salt Lake City, UT
Job Title: Bonding Technician Location: Salt Lake City, UT Type: Contract To Hire Contractor Work Model: Onsite Position Summary The Bonding Technician is responsible for the mechanical and structural assembly of rail vehicles in accordance with techni...
Date Posted: 01/07/2026 Recommended
-
Welding Technician
Elmira, New York
Job Title: Welding Technician Location: Elmira, New York Type: Direct Hire Compensation: $22 - $28 annually Contractor Work Model: Onsite Hours: First Shift Our client is an international market leader for the design, manufacture, maintenance and suppl...
Date Posted: 01/16/2026 Recommended
-
Machine Operator
Parsippany, NJ
Job Title: Machine Operator Location: Parsippany, NJ Type: Direct Hire Compensation: $25 hourly Contractor Work Model: Onsite Hours: 2nd Shift – 2:30pm to 11pm or 3rd Shift – 11:pm to 7:30am / 5 days a week starting Sundays Job Duties Set up and operat...
Date Posted: 01/22/2026 Recommended
-
Electronics Engineering Technician
Landisville, PA
Job Title: Electronics Technician Location: Landisville, PA Type: Direct Hire Contractor Work Model: Onsite Hours: Mon-Fri 7am-3:30pm Position Summary: The Electronics Technician is responsible for installing, maintaining, calibrating, and troubleshoot...
Date Posted: 02/06/2026 Recommended
-
Multi-Craft Maintenance Mechanic Journeyman
Spring Grove, Pennsylvania
Job Title: Multi-Craft Maintenance Mechanic Journeyman Location: Spring Grove, Pennsylvania Type: Direct Hire Compensation: Level I: $31.39; Level II: $33.56; Level III: $35.72. Note, all new hires start as a Level I. Advancement to Level II and Level ...
Date Posted: 01/08/2026 Recommended
-
Production Operator
Orangeburg, NY
Job Title: Production Operator Location: Orangeburg, NY area Hours / Schedule: Monday-Friday; 2nd shift, 3:00pm -11:30pm Type: 6+ Month Contract (possible Contract-to-Hire) Responsibilities Maintains all production areas in a clean and orderly manner w...
Date Posted: 02/02/2026 Recommended
-
Maintenance Technician
Austintown, Ohio
Job Title: Maintenance Technician Location: Austintown, OH Type: Direct Hire Compensation: $72800 annually Contractor Work Model: Onsite Hours: 3rd Shift Maintenance Technician *Multiple positions are available ranging from junior to senior levels. Com...
Date Posted: 12/01/2025 Recommended
-
Mechanical Assembler
Salt Lake City, Utah
Job Title: Mechanical Assembler Location: Salt Lake City, Utah Type: Contract To Hire Contractor Work Model: Onsite Position Summary: The Mechanical Final Assembler is responsible for the mechanical and structural assembly of rail vehicles in accordanc...
Date Posted: 01/22/2026 Recommended
-
Senior CNC Machinist
Saxonburg, Pennsylvania
Job Title: Senior Machinist Location: Saxonburg, PA Type: Direct Hire Compensation: $56160 annually Contractor Work Model: Onsite Hours: Add the job’s scheduled days and times (delete if not needed) Senior CNC Machinist Objective Operate CNC horizontal...
Date Posted: 01/23/2026 Recommended
-
Project EHS Manager
Owings Mills, Maryland
Job Title: Project EHS Manager Location: Owings Mills, Maryland Type: Contract to Hire Compensation: $125000 - $135000 annually Contractor Work Model: Onsite System One is looking for an enthusiastic self-motivated Project HSE Manager who thrives in a ...
Date Posted: 01/15/2026 Recommended
-
Operator-Disc Cell
Lancaster, PA
Job Title: Operator-Disc Cell Location: Lancaster, PA Type: Contract To Hire Contractor Work Model: Onsite Hours: Mon-Fri 6:30am-3pm Job Summary: Operator 2 performs production processes and operates various machines including soak, punch, Double Disc ...
Date Posted: 01/12/2026 Recommended
-
Test Technician
Hagerstown, Maryland
Job Title: Test Technician Location: Hagerstown, Maryland Type: Contract To Hire Compensation: $24 - $24 hourly Contractor Work Model: Onsite Hours: M-F 7am-3:30pm Main Accountabilities Core purpose: This is a classification performing skilled, repair ...
Date Posted: 12/17/2025 Recommended
-
Field Service Technician
Cranberry Township, Pennsylvania
Job Title: Field Service Technician Location: Cranberry Township, Pennsylvania Type: Contract To Hire Compensation: $25- $27/hr Contractor Work Model: Onsite Objective Deliver field-based technical support and repair services for specialized industrial...
Date Posted: 02/05/2026 Recommended
-
CNC Lathe Machinist
Saxonburg, Pennsylvania
Job Title: CNC Lathe Machinist Location: Saxonburg, PA Type: Direct Hire Compensation: $49920 annually Contractor Work Model: Onsite CNC Lathe Machinist Objective Operate CNC horizontal and vertical machining centers to manufacture precision components...
Date Posted: 01/22/2026 Recommended
-
Test Engineer - Electrical
Elmira Heights, NY
Job Title: Test Engineer - Electrical Location: Elmira Heights, NY Type: Direct Hire Compensation: $80000 - $100000 annually Contractor Work Model: Onsite OVERVIEW: Will serve as the expert in either mechanical/electrical engineering requirements for t...
Date Posted: 01/28/2026 Recommended