Wind Turbine GE LOTO Technician
Houston, Texas
Experience: 3
Category: Energy
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 25.00 - 40.00 Per Hour
Job ID: 302454
Date Posted: 05/22/2026
Shortcut: http://jobs.systemone.com/vue8c9
Job Title
Wind Turbine GE (LOTO) Technician
Pay Rate
Based on experience,
Per Diem, Truck and PPE provided
Location:
Various locations across the USA (100% Travel)
Summary
System One is currently hiring GE LOTO certified wind technicians. This position requires you to apply your electro-mechanical skills and experience in determining, performing, and the inspection of maintenance and repair requirements for assigned Wind Turbines.
Essential Duties & Responsibilities
- Perform diagnosis and repair to Wind Turbines as directed by the Site Supervisor and prepare and maintain proper documentation to support the repairs, to include parts usage and time worked
- Perform quality control inspections on repairs and maintenance functions provided by maintenance or repair sub-contractors
- Performs technical, mainly pre-defined tasks for accomplishing defined service delivery work for customer equipment.
- Performs mainly pre-defined, technical tasks (for example, basic commissioning of products and systems, integration of components to a system, basic engineering, maintenance jobs) and work packages on-site and remotely.
- Prepare timely and concise reports regarding inspections to insure proper steps are taken to remedy any deficiencies
- Interact closely with onsite maintenance sub-contractor’s employees and provide guidance and training when applicable
- Be proactive in regards to wind turbine counter measures or enhancements that may be needed and assist in the development of such procedure’s as required
- Assure proper procedures are followed during troubleshooting, repairs, or counter measure installations
- Assure proper procedures are followed by sub-contractor to perform regular scheduled maintenance activities
- Strive to keep maintenance costs low and quality high
- Comply with all Safety policies and procedures and report any violation to the Site Supervisor immediately
- Assist the Site Supervisor in effectively maintaining parts inventory to include initiation or continuance of inventory stock and issuance system for spare parts and defective parts control and communication
Skills and Education:
- To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The individual must carry at least a valid GE LOTO certification.
- The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Minimum education requirement is high school completion and at least (1-2) year related experience and/or training; or equivalent combination of education and experience.
Ref: #106-Eng Houston
-
Wind Turbine Technician - O&M
Houston, Texas
JOB TITLE: Wind Turbine Technician LOCATION: Various locations across the USA, 100% Travel. JOB TYPE: Contract, Project to Project. COMPENSATION: Pay based on experience. $140 Per Diem. PPE and free training. Truck (after MVR and if need it) with maint...
Date Posted: 06/23/2026 Recommended
-
Wind Turbine Blade Repair Technician
Houston, Texas
Job Title Wind Turbine Blade Repair Technician Pay Hourly DOE +$140/Day Per Diem Work Location Various locations across the USA – 100% Travel Summary The Blade Repair Technician is responsible for wind turbine blades inspections, services or repairs. T...
Date Posted: 04/29/2026 Recommended
-
Maintenance Technician (Pump Mechanic)
Quincy, MA
Title: Maintenance Technician/Pump Mechanic Location: Quincy, MA area Start Date: ASAP! Duration: Direct Hire Salary: $27-$40/hr based on experience Hours: Mon-Fri; 6am-2:30pm Degree/Experience: - High school graduate/GED (Post-secondary certificate in...
Date Posted: 06/10/2026 Recommended
-
Maintenance Mechanic
Grant Town, West Virginia
Job Title: Maintenance Mechanic Location: Grant Town, West Virginia Type: Contract To Hire Contractor Work Model: Onsite – onsite Hours: 40.0 Responsibilities: Perform general maintenance, technical maintenance, welding, and machining of equipment at f...
Date Posted: 06/11/2026 Recommended
-
Rolling Stock Maintenance Technician
Pearl City, Hawaii
Job Title: Rolling Stock Maintenance Technician Location: Pearl City, Hawaii Type: Direct Hire Compensation: $28.65/hour Contractor Work Model: Onsite Hours: 40.0 hours per week Responsibilities Perform corrective, preventive, and unscheduled maintenan...
Date Posted: 04/23/2026 Recommended
-
Maintenance Technician
Austintown, Ohio
Job Title: Maintenance Technician Location: Austintown, OH Type: Direct Hire Contractor Work Model: Onsite – onsite Hours: 40.0; 2nd shift Overview Maintain and optimize manufacturing equipment and facilities through skilled multi-craft maintenance, en...
Date Posted: 05/21/2026 Recommended
-
Multi-Craft Maintenance Mechanic Journeyman
Spring Grove, Pennsylvania
Job Title: Multi-Craft Maintenance Mechanic Journeyman Location: Spring Grove, Pennsylvania Type: Direct Hire Compensation: Level I: $36.10. Note, all new hires start as a Level I. Advancement to Level II and Level III is dependent on work performance....
Date Posted: 05/14/2026 Recommended
-
Signal Technician
Pearl City, Hawaii
Job Title: Signal Technician Location: Pearl City, Hawaii Type: Direct Hire Compensation: $28.37/hr Contractor Work Model: Onsite – onsite Hours: The role requires flexibility and efficiency which require shift rotation, weekends and holidays work typi...
Date Posted: 04/23/2026 Recommended
-
Manufacturing Facility Technician
Quincy, MA
Title: Manufacturing Facilities Technician Location: Quincy, MA area Hours / Schedule: Mon-Fri; 6am-2:30pm (with occasional OT available) Type: Direct Hire Responsibilities Working under the direction and supervision of others, perform routine inspecti...
Date Posted: 06/10/2026 Recommended
-
Field Turbine Operator
Midland, TX
Job Title: Field Turbine Operator Location: Midland, TX Type: Direct Hire Compensation: $38/hr plus or minus Contractor Work Model: Onsite – onsite Hours: 40.0 hours per week Security Clearance: Not specified Responsibilities Ensure the safe, efficient...
Date Posted: 06/02/2026 Recommended
-
Maintenance Technician- Night shift
Beloit, WI
Job Title: Maintenance Technician - Night shift Location: Beloit, WI Hours / Schedule: Night shift Type: Direct Hire Compensation: $72,800 Responsibilities Perform electro-mechanical maintenance duties in a batching and drying SQF 3 processing facility...
Date Posted: 06/17/2026 Recommended
-
Temporary Maintenance Mechanic
Lakewood, NJ
Job Title: Temporary Maintenance Mechanic Location: Lakewood, NJ Type: Contract To Hire Compensation: $25.00 - $30.00 per hour Contractor Work Model: Onsite – onsite Hours: Monday-Friday 8:00 am - 4:30 pm Temporary Maintenance Mechanic Responsibilities...
Date Posted: 06/26/2026 Recommended
-
Maintenance Tech-Multi
Hubbard, OH
Job Title: Maintenance Tech-Multi Location: Hubbard, OH Type: Direct Hire Compensation: $58240 annually Contractor Work Model: Onsite Hours: Multiple shifts candidates should be able to work any (8am-4pm Mon-Wed, 6am-2pm Thu-Fri, 8pm-6am Tue-Sat, 10pm-...
Date Posted: 05/06/2026 Recommended
-
Maintenance Mechanic
Lakewood, NJ
Job Title: Maintenance Mechanic Location: Lakewood, NJ Type: Contract To Hire Compensation: $25.00 - $30.00 per hour Contractor Work Model: Onsite – onsite Hours: Monday-Friday 8:00 am till 4:30 pm Responsibilities Perform a wide range of maintenance a...
Date Posted: 06/17/2026 Recommended
-
I&C Technician
Rochester, NY
I&C Technician (Instrumentation & Controls) Location: Rochester, NY Work Model: Onsite Schedule: Day shift | 8-hour shifts | 40 hours/week (overtime available) Pay Range: $26–$37/hour Position Summary The I&C Technician installs, maintains, troubleshoo...
Date Posted: 04/07/2026 Recommended
-
Rail Services Technician
Landover Hills, NY
Job Title: Rail Services Technician Location: Landover Hills, NY Type: Direct Hire Compensation: $24 - $36 hourly Contractor Work Model: Onsite OVERVIEW: The successful candidate will have previous knowledge within a maintenance and engineering environ...
Date Posted: 04/14/2026 Recommended
-
Associate - Inventory I - C
Orlando, FL
Job Title: Inventory Associate C-shift Friday to Monday 6am to 6:30pm Location: Orlando, FL Type: Contract / On-Site Compensation: $28 per hour Responsibilities • Support continuous improvement initiatives by evaluating, monitoring, and escalating road...
Date Posted: 06/30/2026 Recommended
-
Lead Mechanic
Dayton , NJ
Job Title: Lead Mechanic Location: Dayton, NJ Type: Direct Hire Compensation: Up to $40 per hour Contractor Work Model: Onsite – onsite Hours: 7 AM- 3:30 PM Overview Responsibilities Oversee and support the maintenance, troubleshooting, and optimizatio...
Date Posted: 05/15/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $42.32; Note: all new hires begin at Level I. Advancement to Level II & III is dependent on work p...
Date Posted: 06/17/2026 Recommended
-
Electrical Test Technician
Elmira Heights, NY
OVERVIEW: The successful candidate will have previous knowledge of the theory of electricity, electrical schematics and various electrical measuring devices such as multi-meters, oscilloscopes, and megger/hi-pot testing FUNCTIONAL DESCRIPTION: Be part ...
Date Posted: 06/15/2026 Recommended
-
Associate - Inventory I - B
Orlando, FL
Job Title: Inventory Associate B-shift M-F 3pm-130am Location: Orlando, FL Type: Contract / On-Site Compensation: 28 per hour Responsibilities • Support continuous improvement initiatives by evaluating, monitoring, and escalating roadblocks that could ...
Date Posted: 06/29/2026 Recommended
-
Chief Engineer
Midland, Texas
Job Title: Chief Engineer Location: Midland, Texas Type: Direct Hire Compensation: $70,000.00 - $100,000.00 Work Model: Onsite – onsite Overview The Stationary Chief Engineer is responsible for managing day-to-day plant operations including all service...
Date Posted: 06/23/2026 Recommended
-
Material Movement Associate I -D
Merritt Island, FL
Job Title: Material Movement Associate - I D Shift Friday -Sunday, 6pm - 6am Location: Merritt Island, FL Type: Contract / On-Site Compensation: $28 per hour Responsibilities • Support continuous improvement initiatives by evaluating, monitoring, and e...
Date Posted: 06/29/2026 Recommended
-
Associate - Inventory I - B
Orlando, FL
Job Title: Inventory Associate B Shift M-F 3pm-1:30am Location: Orlando, FL Type: Contract / On-Site Compensation: $28 per hour Responsibilities • Support continuous improvement initiatives by evaluating, monitoring, and escalating roadblocks that coul...
Date Posted: 06/23/2026 Recommended
-
Associate - Inventory I - C
Orlando, FL
Job Title: Inventory Associate C-shift Friday to Monday 6am to 6:30pm Location: Orlando, FL Type: Contract / On-Site Compensation: $28.00 per hour Responsibilities • Support continuous improvement initiatives by evaluating, monitoring, and escalating r...
Date Posted: 06/30/2026 Recommended
-
Machine Operator Tier 1 - First Shift
Chanhassen, MN
Job Title: Machine Operator Tier 1 - First Shift Location: Chanhassen, MN Type: Contract Compensation: $22.00 / hour Contractor Work Model: On-Site Hours: 6:00 am - 2:30 pm, Monday - Friday, with mandatory overtime every other Saturday Security Clearan...
Date Posted: 05/28/2026 Recommended
-
Toolmaker
Latrobe, Pennsylvania
Job Title: Toolmaker Location: Latrobe, PA Type: Direct Hire Compensation: $45,760.00 - $54,080.00 Contractor Work Model: Onsite – onsite Hours: 40.0 Responsibilities Complete mold repairs and modifications necessary for the production of acceptable mo...
Date Posted: 06/05/2026 Recommended
-
Production Equipment Mechanic / Technician (2nd shift)
Eatontown, NJ
Production Equipment Mechanic / Technician (2nd shift) Direct Hire – Located in Eatontown, NJ Hours / Shift: Second Shift: Monday – Friday, 2:00 PM – 10:30 PM Compensation: Pay: $65K – $68K annually (salaried), based on experience + straight time OT . ...
Date Posted: 06/25/2026 Recommended
-
Associate - Inventory I - B
Orlando, FL
Job Title: Inventory Associate B-shift M-F 3pm-130am Location: Orlando, FL Type: Contract On-Site Compensation: $28 per hour Responsibilities • Support continuous improvement initiatives by evaluating, monitoring, and escalating roadblocks that could c...
Date Posted: 06/22/2026 Recommended
-
Owners Representative
Wasco, Oregon
Job Title: Owners Representative - Wind Turbine Location: Wasco, Oregon Type: Contract Compensation: DOE Contractor Work Model: Onsite – onsite Hours: 40.0 System One is seeking a high-caliber Owners Representative to support a wind turbine power proje...
Date Posted: 06/05/2026 Recommended