Harnessing Electrical Technician III
North Hollywood, CA
Experience: 4
Education: High School
Category: Industrial & Manufacturing
Contractor Work Model: Onsite
Brand: System One
Compensation Range: 52.00 - 54.49 Per Hour
Job ID: 377352
Date Posted: 07/23/2026
Shortcut: http://jobs.systemone.com/1DbMCJ
Harnessing Electrical Technician III
Location: North Hollywood, CA
Schedule: On-site | Contract
Pay Rate: starts at $52 and up to $54 per hour
Position Overview
We are seeking an experienced Harnessing Electrical Technician to support electrical assembly, harness fabrication, and integration activities for advanced aerospace systems. This role is responsible for building, installing, routing, and troubleshooting electrical harnesses and hardware used in spacecraft and ground support equipment. The ideal candidate has hands-on experience with electrical assemblies, cable fabrication, connector termination, and interpreting engineering documentation in a production or prototype environment.
Key Responsibilities
Electrical Assembly & Harness Fabrication
- Fabricate, assemble, and install electrical harnesses and cable assemblies according to engineering specifications.
- Prepare wires and cables through cutting, stripping, labeling, and terminating.
- Perform connector termination, crimping, soldering (if applicable), and cable management.
- Route, secure, and install wiring harnesses within complex mechanical and electrical assemblies.
- Install electrical hardware and support integration activities for spacecraft and ground support equipment.
Testing & Troubleshooting
- Perform continuity checks and basic electrical testing to verify assembly quality.
- Troubleshoot electrical installation, routing, connector, and fit-up issues during assembly and integration.
- Identify defects and support corrective actions to ensure hardware meets quality standards.
- Assist engineering teams during prototype builds, testing, and production activities.
Documentation & Quality
- Read and interpret engineering drawings, wiring diagrams, electrical schematics, and work instructions.
- Ensure all work is completed in accordance with manufacturing procedures and quality standards.
- Maintain clean, organized, and safe work areas while following company safety policies.
- Support continuous improvement initiatives within the manufacturing process.
Required Qualifications
- Experience with electrical harness fabrication, installation, and routing.
- Hands-on experience with wire preparation, crimping, connector termination, and cable management.
- Ability to read and interpret electrical drawings, wiring diagrams, schematics, and work instructions.
- Experience integrating electrical and electronic hardware into assemblies.
- Proven troubleshooting skills related to electrical installation, routing, and fit-up issues.
- Familiarity with standard electrical assembly tools, crimp tools, multimeters, continuity testers, and other basic test equipment.
- Experience supporting prototype, test, or production hardware.
- Basic electrical testing and troubleshooting experience.
- Previous experience working in manufacturing, production, assembly, or integration environments.
Preferred Qualifications
- Experience working with vacuum chamber systems.
- Experience supporting furnace reactor systems.
- Aerospace, defense, electronics manufacturing, or other high-reliability production experience.
- IPC wiring or cable assembly certifications are a plus.
Ideal Background
Candidates with experience as Electrical Technician, Harness Technician, Wire Harness Technician, Avionics Technician, Electrical Assembler, Integration Technician, Electronics Technician, Cable Assembly Technician, or Aerospace Electrical Technician are strongly encouraged to apply. Experience in aerospace, defense, automotive, electronics manufacturing, or other precision assembly environments is highly preferred.
System One, and its subsidiaries including Joulé and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan.
System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law.
Ref: #404-IT Pittsburgh
-
Electrical Final Assembler
Salt Lake City, Utah
Job Title: Electrical Final Assembler Location: Salt Lake City, Utah Type: Contract To Hire Contractor Work Model: Onsite As an Electric Final Assembler you are responsible for proper assembly of all wiring and electrical components in the project. You...
Date Posted: 04/30/2026 Recommended
-
Electrical Tech
Meadville, Pennsylvania
Job Title: Electrical Tech Location: Meadville, Pennsylvania Type: 6 Month Contract Compensation: $25-$35 per hour Hours: Monday - Friday starting at 6 AM (8-10 hour days) Overview We are seeking an Electrical Technician to support a busy manufacturing...
Date Posted: 07/09/2026 Recommended
-
Mechanical Assembler
Cranberry Township, Pennsylvania
Job Title: Mechanical Assembler Location: Cranberry Twp, PA Type: Contract-to-Hire Compensation: 21-22/hr Contractor Work Model: Onsite Objective Assemble industrial equipment and machine components by following specifications, drawings, and work instr...
Date Posted: 06/05/2026 Recommended
-
Field Installation Support Technician (Entry-level)
Houston, Texas
Job Title: Field Installation Support Technician (Entry-level) Location: 100% travel / field work Type: 6-month contract with high possibility of conversion to permanent Compensation: $20 – $25/hr per hour plus additional "Health & Wellness" rate of $5...
Date Posted: 07/22/2026 Recommended
-
Senior Assembler
Batesburg-Leesville, South Carolina
Job Title: Senior Assembler Location: Batesburg-Leesville, South Carolina Type: Contract Compensation: $35.00 - $40.00 per hour Contractor Work Model: Onsite – onsite Overview The Senior Assembler focuses on advanced-level assembly tasks, working from ...
Date Posted: 06/03/2026 Recommended
-
Control Panel Tech
Bridgeville , PA
Job Title: Control Panel Tech Location: Bridgeville, PA Type: Direct Hire Compensation: $52,000.00 - $60,320.00 Work Model: Onsite – onsite Hours: 40.0 Responsibilities Assemble and wire electrical control panels in accordance with project specificatio...
Date Posted: 07/21/2026 Recommended
-
Entry Level Panel Tech
Bridgeville, PA
Job Title: Entry Level Panel Tech Location: Bridgeville, PA Type: Direct Hire Compensation: $41,600.00 Work Model: Onsite – onsite Hours: 40.0 Responsibilities Assist in assembling and wiring control panels based on project specifications, electrical s...
Date Posted: 07/21/2026 Recommended
-
Field Installation Support Technician
Chicago, Illinois
Job Title: Field Installation Support Technician (Entry Level) Location: 100% Travel Type: Contract Compensation: $20.00 per hour Work Model: Onsite Responsibilities Provide general hands-on support to field crews performing equipment installation, sit...
Date Posted: 07/22/2026 Recommended
-
Field Installation Support Technician
Dallas, Texas
Job Title: Field Installation Support Technician (Entry Level) Location: 100% Travel Type: Contract Compensation: $20.00 per hour Work Model: Onsite Responsibilities Provide general hands-on support to field crews performing equipment installation, sit...
Date Posted: 07/22/2026 Recommended
-
Electrical, Instrumentation, and Controls Technician
Spring Grove, Pennsylvania
Job Title: Electrical, Instrumentation, and Controls Technician Location: Spring Grove, Pennsylvania Type: Direct Hire Base Hourly Rate: E/I & C Level I: $42.32; Note: all new hires begin at Level I. Advancement to Level II & III is dependent on work p...
Date Posted: 07/24/2026 Recommended
-
Mechanical Assembler
Elmira Heights, NY
Job Title: Mechanical Assembler Location: Elmira Heights, NY Type: Direct Hire Compensation: $20.00 - $23.00 Contractor Work Model: Onsite Hours: 40.0 Responsibilities Perform highly skilled maintenance, installation, repair, and troubleshooting work i...
Date Posted: 05/15/2026 Recommended
-
Head Of Operations
Santa Fe Springs, CA
Job Title: Head of Operations Location: Santa Fe Springs, CA Type: Direct Hire Compensation: $150,000 - $190,000 annually Work Model: Onsite Our Client headquartered in Santa Fe Springs, CA, is a fast-growing manufacturer specializing in electric equip...
Date Posted: 06/10/2026 Recommended
-
Machinist/quality inspector
Richland, Washington
Machinist-Quality Technician Location: Richland, Washington Contract: 12 months contract to direct hire $28-$34 an hour based on experience. Employment Type: Full-Time, Non-Exempt (40 hours/week) System One is seeking a qualified Quality Technician to ...
Date Posted: 07/20/2026 Recommended
-
Mechanical Design Engineer
York, PA
Job Title: Mechanical Design Engineer Location: York, PA Type: Direct Hire Work Model: On-Site Responsibilities Collaborate with engineering and design teams to develop custom plastic extrusion machinery and systems. Assist Project Manager in ensuring ...
Date Posted: 07/24/2026 Recommended
-
Production Operator
Orangeburg, NY
Job Title: Production Operator Location: Orangeburg, NY Type: Contract Contractor Work Model: Onsite – onsite Hours: Mon-Fri 11pm-7:30am Responsibilities Operate and support production, assembly, or packaging lines during overnight operations Maintain ...
Date Posted: 05/21/2026 Recommended
-
Manufacturing Production Supervisor
Ruther Glen, VA
Manufacturing Production Supervisor Location: Ruther Glen, VA Schedule: 2nd shift, 3:00 PM – 1:00 AM, Monday–Thursday (4x10s) with potential overtime Pay rate: $36 –$42/hour Overview Join a fast-paced manufacturing environment supporting production and...
Date Posted: 06/17/2026 Recommended
-
Mechanical Assembler
Salt Lake City, Utah
Job Title: Mechanical Assembler Location: Salt Lake City, Utah Type: Contract To Hire Contractor Work Model: Onsite Position Summary: The Mechanical Final Assembler is responsible for the mechanical and structural assembly of rail vehicles in accordanc...
Date Posted: 05/14/2026 Recommended
-
Lead Mechanic
Dayton , NJ
Job Title: Lead Mechanic Location: Dayton, NJ Type: Direct Hire Compensation: Up to $40 per hour Contractor Work Model: Onsite – onsite Hours: 7 AM- 3:30 PM Overview Responsibilities Oversee and support the maintenance, troubleshooting, and optimizatio...
Date Posted: 05/15/2026 Recommended
-
Lead Manufacturing Test Engineer
Batesburg-Leesville, South Carolina
Job Title: Lead Manufacturing Test Engineer Location: Batesburg-Leesville, North Carolina Type: Direct Hire Compensation: $100,000.00 - $125,000.00 Contractor Work Model: Onsite – onsite Responsibilities Lead a team of approximately 8 Test Engineers in...
Date Posted: 05/21/2026 Recommended
-
Production Operator
Orangeburg, NY
Job Title: Production Operator – Medical Device / Diagnostics Manufacturing Location: Blauvelt, NY Contract Assignment – 6 months Pay rate: $21.00–$23.00/hour (depending upon experience) Work Model: Onsite Available Shifts (Monday–Friday) 1st Shift: 6:...
Date Posted: 06/08/2026 Recommended
-
Maintenance Technician
Austintown, Ohio
Job Title: Maintenance Technician Location: Austintown, OH Type: Direct Hire Contractor Work Model: Onsite – onsite Hours: 40.0; 2nd shift Overview Maintain and optimize manufacturing equipment and facilities through skilled multi-craft maintenance, en...
Date Posted: 05/21/2026 Recommended
-
Machinist CNC
Richland, WA
CNC Machinist Richland, WA (Onsite) System One | Full-Time | 40 Hours/Week | Contract-to-Hire System One is seeking a CNC Machinist to join our team in Richland, WA. This is an outstanding contract-to-hire opportunity for a skilled machinist looking to...
Date Posted: 07/07/2026 Recommended
-
Manufacturing Team Lead
Ruther Glen, VA
Manufacturing Team Lead Location: Ruther Glen, VA Schedule: 1st Shift Monday - Friday 7am - 3pm 2nd Shift Monday–Thursday, 3:00 PM–1:00 AM (4x10s) + potential overtime Pay: $29/hour Type: Direct Hire Role Summary Hands-on production lead role supportin...
Date Posted: 07/23/2026 Recommended
-
Maintenance Technician
Latrobe, Pennsylvania
Job Title: Maintenance Technician Location: Latrobe, PA Type: Direct Hire Compensation: $47,800 - $56,000 Work Model: Onsite – onsite Hours: 40.0 Responsibilities • Perform troubleshooting, maintenance repairs, and preventive maintenance for all equipm...
Date Posted: 06/24/2026 Recommended
-
Maintenance Mechanic
Lakewood, NJ
Job Title: Maintenance Mechanic Location: Lakewood, NJ Type: Contract To Hire Compensation: $25.00 - $30.00 per hour Contractor Work Model: Onsite – onsite Hours: Monday-Friday 8:00 am till 4:30 pm Maintenance Mechanic Responsibilities: Perform a wide ...
Date Posted: 07/24/2026 Recommended
-
Temporary Maintenance Mechanic
Lakewood, NJ
Job Title: Temporary Maintenance Mechanic Location: Lakewood, NJ Type: Contract To Hire Compensation: $25.00 - $30.00 per hour Contractor Work Model: Onsite – onsite Hours: Monday-Friday 8:00 am - 4:30 pm Temporary Maintenance Mechanic Responsibilities...
Date Posted: 07/15/2026 Recommended
-
Master Planner
Greenville, South Carolina
Master Planner (Contract) – On-site | Greenville, SC We’re seeking a Master Planner to provide planning and scheduling support for multiple mission requirements across multiple locations. Overview: This role supports Program Management by developing an...
Date Posted: 05/07/2026 Recommended
-
Manufacturing Production Leader
Ruther Glen, VA
Job Title: Manufacturing Production Leader Location: Ruther Glen, VA Type: Direct Hire Compensation: $140,000 – $150,000 Overview We are seeking a Manufacturing Production Supervisor / Operations Manager to lead a high-performing manufacturing value st...
Date Posted: 06/09/2026 Recommended
-
Construction Installer
Callery , PA
Summary A Truck Assembler must develop a complete knowledge of all vehicle layouts, components, and equipment. He/she must be able to maintain the assigned tasks listed in the production schedule and work in a team environment. Key Skill Set Requiremen...
Date Posted: 07/21/2026 Recommended
-
Lead System Engineer
Pittsburgh, Pennsylvania
Title: Lead Design Engineer Location: Onsite, Pittsburgh, PA 15213 Type: Direct-Hire/Permanent Hours: Standard business hours Start: May Overview: Join a cutting-edge lab to discover novel therapeutics that are seeking a highly motivated Lead Engineer ...
Date Posted: 05/26/2026 Recommended